Sanding fan 339 SM with 6 mm shaft 80mm x 30mm P60 (10 units) 3M

€9.76

€9.76 (IVA incl.)
€8.07 (Sin IVA)

339 SM sander fan with axle of 6 mm 80 mm x 30 mm P60 (10 st) 3M. What. Aluminium oxide. Woven fabrics containing predominantly, but < 85% polyester staple fibres by weightRecommended for finishing.

Add to basket

Quick view

Sanding fans 339 SM with 6 mm shaft 40mm x 20mm (10 units) 3M

€4.88

€4.88 (IVA incl.)
€4.03 (Sin IVA)

339 SM sanding fans with axles of 6 mm 40 mm x 20 mm (10 st) 3M. What. made of aluminum oxide. Woven fabrics containing predominantly, but < 85% polyester staple fibres by weightFor finishing

Add to basket

Quick view

Cubitron II conical flap disc - 967A 65051 (10 units) 3M

€8.51

€8.51 (IVA incl.)
€7.03 (Sin IVA)

Other plates, sheets and strip 3M. What. The low operating temperature reduces metal discoloration and oxidation as well as heat-induced stress cracks. Choose between diameter 115 mm, 125 mm, 180 mm.

Add to basket

Quick view

Conical flap discs 769F with PSG technology 51997 (10 units) 3M

€5.06

€5.06 (IVA incl.)
€4.18 (Sin IVA)

769F conical plate discs with PSG 51997 technology (10 st) 3M. What. It cuts faster and lasts longer than conventional abrasive grain thanks to precision grain technology 3M It has been shown to outperform traditional...

Add to basket

Quick view

Sanding fans with 6 mm shaft 60mm x 30mm P40 339 SM (10 units) 3M

€6.33

€6.33 (IVA incl.)
€5.23 (Sin IVA)

Sanding fans with axis 6 mm 60 mm x 30 mm 3M. What. It's aluminum oxide. Support of polyester fabric. To finish. Choose from the grain: P40, P60, P80, P120.

Add to basket

Quick view

Sanding fan 339 30mm x 15mm x 6mm P60 (10 units) 3M

€3.65

€3.65 (IVA incl.)
€3.02 (Sin IVA)

Other, not further worked than hot-rolled 3M. What. Of aluminium oxidePolyester fabric backing - for finishes Good mineral anchorage and quality finish.

Add to basket

Quick view

Abanico lijador 339 80mm x 50mm x 6mm P40 (10 uds) 3M

€9.76

€9.76 (IVA incl.)
€8.07 (Sin IVA)

It consists predominantly of polyethylene and polypropylene 3M. What. Of aluminium oxideSupport of polyester fabric. To finish.

Add to basket

Quick view

769F flat flap discs with PSG 51996 technology (10 units) 3M

€5.06

€5.06 (IVA incl.)
€4.18 (Sin IVA)

Flat sheet discs 769F with PSG 51996 technology 3M. It cuts faster and lasts longer than conventional abrasive grain thanks to precision grain technology 3M It has been shown to outperform traditional aluminium...

Add to basket

Quick view

115mm 566A Conical Flap Disc, P40 PN65025 3M

€5.19

€5.19 (IVA incl.)
€4.29 (Sin IVA)

For the purposes of this Regulation, the following definitions shall apply: 3M. What. They allow you to sand and bond in one go, saving time and money. Speed: 13000 rpm

Add to basket

Quick view

566A 125mm Conical Finishing Flap Disc 3M

€5.42

€5.42 (IVA incl.)
€4.48 (Sin IVA)

Other, of circular cross-section 3M. What. They allow you to sand and bond in one go, saving time and money. The alumina-zirconia ore is automatically sharpened, offers a longer service life and more cutting power...

Add to basket

Quick view

566A 115mm x 22mm Flat Flap Disc, P40 PN65029 3M

€5.19

€5.19 (IVA incl.)
€4.29 (Sin IVA)

Plated plate 566A of 115 mm x 22 mm, P40 PN65029 3M. What. They allow you to sand and bond in one go, saving time and money. For roughing at medium pressure, removal of small welds, finishing and surface preparation.

Add to basket

Quick view

566A 125mm Finishing Flap Disc, 40 Flat PN65037 3M

€5.42

€5.42 (IVA incl.)
€4.48 (Sin IVA)

For the purposes of this Regulation, the following definitions apply: 3M. What. They allow you to sand and bond in one go, saving time and money. That's it.

Add to basket

Quick view

566A 180mm Finishing Flap Discs, P40 Tapered Flat PN65045 3M

€10.42

€10.42 (IVA incl.)
€8.61 (Sin IVA)

Plates, sheets and strip for finishing 566A 180 mm, P40 3M. What. They allow you to sand and bond in one go, saving time and money. Choose between grain P40 and P60.

Add to basket

Quick view

566A 180mm Flap Discs, P40 Flat PN65045 3M

€10.42

€10.42 (IVA incl.)
€8.61 (Sin IVA)

Plates of 180 mm film 566A, P40 Flat PN65045 3M. What. That's it. They allow you to sand and bond in one go, saving time and money. For roughing at medium pressure, removal of small welds, finishing and surface...

Add to basket

Quick view

Cutting discs Cubitron II Plano T41 65513 115 mm x 1 mm x 22 mm (25 units) 3M

€5.63

€5.63 (IVA incl.)
€4.65 (Sin IVA)

Cutting discs Cubitron II T41 65513 115 mm x 1 mm x 22 mm (25 points) 3M. What. Designed to cut faster and last longer than competing ceramic products. The resin-reinforced hard drive cuts through almost any...

Add to basket

Quick view

94003Q T27 115mm Depressed Center Grinding Wheel, PN94003 Cubitron II (10 pcs) 3M

€11.88

€11.88 (IVA incl.)
€9.82 (Sin IVA)

It shall be capable of withstanding a pressure of not more than 100 kPa 3M. What. Designed to cut faster and last longer than ceramic products.

Add to basket

Quick view

Sunk center cutting 65472 (50 units) Cubitron II 3M

€7.80

€7.80 (IVA incl.)
€6.45 (Sin IVA)

Cutting wheel with sunken centre 65472 3M. What. Mineral Cubitron II · Type 42 (centre is sunk) Technology 3M PSG, for very fast, cold cuts and longer disc lifeOptimal results at low work pressures.

Add to basket

Quick view

51800 2.5 mm Depressed Center Cutting Discs (25 Units) Silver 3M

€4.03

€4.03 (IVA incl.)
€3.33 (Sin IVA)

Other plates, sheets, film, foil and strip 3M. What. The grain in the form of precision of 3M cut cleanly and quickly, which helps increase productivity.

Add to basket

Quick view

Cutting disc and roughing 4.2 mm and grain 36+ 81157 Cubitron II (10 units) 3M

€11.24

€11.24 (IVA incl.)
€9.29 (Sin IVA)

Cutting and grinding disc of a thickness of 4.2 mm 3M. What. Type 27 · Technology 3M PSG for super-fast cuts and longer disc life Versatile, it can be used as a roughing disc or as a cutting disc. Diameters are 115...

Add to basket

Quick view

Flexible grinding discs Grinding T27 36+ 14437 (20 units) 3M

€3.88

€3.88 (IVA incl.)
€3.21 (Sin IVA)

Flexible grinding discs Grinding, T27 100 mm x 3 mm x 16 mm 36+ 14437 (20 st) 3M.Discos the value of all the materials of Chapter 9 used does not exceed 20% of the ex-works price of the product 3M. What. Resin bonding...

Add to basket

Quick view

Flat cutting discs 51771, from 75 to 230 mm (50 Units) Silver 3M

€3.07

€3.07 (IVA incl.)
€2.54 (Sin IVA)

Other plates, sheets, film, foil and strip 3M . What. It quickly cuts metal pipes, tubes, flat sheets and more. Long-lasting disc that provides good performance and great value.

Add to basket

Quick view

7mm 51747 Depressed Center Grinding Discs (10 pcs) Silver 3M

€5.26

€5.26 (IVA incl.)
€4.35 (Sin IVA)

Plates, sheets, film, foil and strip, of non-cellular polymers of vinyl chloride 3M. What. The grain in the form of precision of 3M cut cleanly and quickly, which helps increase productivity.

Add to basket

Quick view

76mm x 6mm Unitized XL-DR Disc, 2A Medium Scotch-Brite Roloc (10 Units) 3M

€12.29

€12.29 (IVA incl.)
€10.16 (Sin IVA)

Unitised XL-DR disc of 76 mm x 6 mm, 2A Medium Scotch-Brite Roloc (10 Uds) 3M. What. Filler resistant, to minimize preparation and cleaning. Minimizes heat buildup, ideal for stainless steel or other heat sensitive...

Add to basket

Quick view

Scotch-Brite XL-UR 50mm Unitized Finishing Disc (15 pcs) 3M

€8.78

€8.78 (IVA incl.)
€7.26 (Sin IVA)

For the purposes of this Regulation, the following definitions shall apply: 3M. What. The fast cutting precision grain minimizes heat accumulation on the workpiece. Recommended for removing and mixing welds on all...

Add to basket

Quick view

Labor protection experts

Abrasives 3M

Sanding fan 339 SM with 6 mm shaft 80mm x 30mm P60 (10 units) 3M

Sanding fans 339 SM with 6 mm shaft 40mm x 20mm (10 units) 3M

Cubitron II conical flap disc - 967A 65051 (10 units) 3M

Conical flap discs 769F with PSG technology 51997 (10 units) 3M

Sanding fans with 6 mm shaft 60mm x 30mm P40 339 SM (10 units) 3M

Sanding fan 339 30mm x 15mm x 6mm P60 (10 units) 3M

Abanico lijador 339 80mm x 50mm x 6mm P40 (10 uds) 3M

769F flat flap discs with PSG 51996 technology (10 units) 3M

115mm 566A Conical Flap Disc, P40 PN65025 3M

566A 125mm Conical Finishing Flap Disc 3M

566A 115mm x 22mm Flat Flap Disc, P40 PN65029 3M

566A 125mm Finishing Flap Disc, 40 Flat PN65037 3M

566A 180mm Finishing Flap Discs, P40 Tapered Flat PN65045 3M

566A 180mm Flap Discs, P40 Flat PN65045 3M

Cutting discs Cubitron II Plano T41 65513 115 mm x 1 mm x 22 mm (25 units) 3M

94003Q T27 115mm Depressed Center Grinding Wheel, PN94003 Cubitron II (10 pcs) 3M

Sunk center cutting 65472 (50 units) Cubitron II 3M

51800 2.5 mm Depressed Center Cutting Discs (25 Units) Silver 3M

Cutting disc and roughing 4.2 mm and grain 36+ 81157 Cubitron II (10 units) 3M

Flexible grinding discs Grinding T27 36+ 14437 (20 units) 3M

Flat cutting discs 51771, from 75 to 230 mm (50 Units) Silver 3M

7mm 51747 Depressed Center Grinding Discs (10 pcs) Silver 3M

76mm x 6mm Unitized XL-DR Disc, 2A Medium Scotch-Brite Roloc (10 Units) 3M

Scotch-Brite XL-UR 50mm Unitized Finishing Disc (15 pcs) 3M

Labor protection experts

The widest catalog of labor protection

Fast and effective attention

Menu

Search