Combined signal Danger Train Pass Forbid crossing the SEKURECO tracks

Combined signal indicating the messages "Danger Train Pass Forbid crossing the tracks" SEKURECO. It is a text poster and pictogram on a yellow and red layer, grouping 2 signals in 1 and is available in white and adhesive PVC materials and in measures of 600 x 400 mm

It is common to find the warning signal about train passage at service stations, means and transportation and related crossings

The poster is easy to install either on walls, doors, machinery or any other area where it is necessary to warn about the associated risks, while the poster fulfills its goal of alerting and raising awareness of those in the environment. Don't let the risks go unnoticed! and install these safety signs.

Among the most common technical characteristics of prohibition signals with SEKURECO UV inks are:

• Form:Usually a circle with a pictogram and text
• Size:Can vary depending on the size and location of the work area.
• Colours:Security signals use specific colors to communicate your message. The red color is used for prohibition signals and alerting on dangerous behaviors
• Material:Safety signals can be made from different materials, such as plastic, aluminum or vinyl sticker. The material used will depend on the location and environment in which the signal will be placed. For example, if the signal is placed in an area where there is a lot of dust or humidity, it is advisable to use a material resistant to these conditions.

SEÑAL GLASSPACK PVC: DESCRIPTION

Signs ofGLASSPACKOf0.7 mmThey consist of a semi-rigid polymer base (PVC) with glossy white finish on which the color coating and protection is applied using serigraphic techniques.

Our products areNON-TOXIC, NON-RADIACTIVE, NON-COMBUSTIBLE AND RESISTANT TO.

• SOPORTE:GLASSPACK PLANCHA of 0.7 mm (semi-rigid PVC) of bright white.
• COLOR CAPA:Of serigraphic inks of cured by means of UV radiation of polyvalent use. NEGRO COLOR, VERDE, ROJO, AZUL, AMARILLO, NARANJA depending on the signal typeBRILLANT, PROTECTION OF SEÑAL AGAINST UV RAYS.

SEÑAL PVC ADHESIVO (PEGATINA)

The signals are made on a single-white monomeric vinyl sheet self-adhesive glow

The colour coating is applied using serigraphic techniques.

The adhesive is protected against inclements by means of a transparent glittered laminate.

Our products areNON-TOXIC, NON-RADIACTIVE, NON-COMBUSTIBLE AND RESISTANT TO.

Description:

• NOT FURTHER WORKED THAN HOT-ROLLED, IN COILS0.8 mm. Transparent film of PVC CALANDRADO with MONOMÉRICO PLASTIFICANT, free of cadmium, with UV filter.
• COLOR CAPAEPOXÍDICA RESINES OF NEGRO COLOR, VERDE, ROJO, AZUL, AMARILLO, NARANJA depending on the signal type.
• VINILO AUTOADHESIVO0.08 mm made of white PVC resin. ADHESIVO rear face.

SEMIRRÍGIO PVC SOPORT - GLASSPACK

Pvc support finished gloss, high optical quality especially suitable for printing using serigraphic techniques with UV curing inks in offset

SOPORTE VINILO MONOMÉRICO AUTOADHESIVO

Lamina de vinilo printible digital monomeric kale (80μ) white self-adhesive shine.

Acrylic adhesive based on water removable, which allows to fix and remove the application under a very slight pressure with the fingers, to then lift it and reposition it if necessary (characteristics are lost when exerting excessive pressure).

COLOR CAPA TINTES

Color layer (according to signal requirements) by serigraphic inks of cured by means of UV radiation of polyvalent use on various plastics.

It is inks with glossy finish, whose mixture of compounds and radiated healing method gives it an excellent elasticity and reactivity, not only in overprint if not also in the face of the bend and the skeleton.

Mix of oligomers, monomers, photo-initiators and pigments.

The ink contains the following dangerous elements:

• Diacrilate of hexamethylene

• Isobornyl acrylate

• Oxybis diacrilate (methyl-2,1-ethanyl)

• 1-vinilhexahidro-2H-azepin-2-ona

DIMENSIONS (MM)

600 x 400 mm

APPLICATIONS

Train stations

Crosses

Steps related to the circulation of trains

INSTALATION / EMPLACEMENT / SERIAL COLOCATION

Check our blog to find out how to install a sign or sign: https://www.sekureco.eu/gb/blog/76_.html

To correctly place a sign of obligation that indicates that the use of gloves is mandatory, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the signal at eye height and in a place where it cannot be obstructed by other objects or signals.

LaFIJATIONThe signaling element must be made on a firm and free surface is dirt.

The signal can be secured byMECHANIC ELEMENTS(storm, rivets, etc...) orADHESIVOS(assembly adhesive, queues, silicones...) in a careful way, avoiding to dirty the surface view or the deformation of it.

MAINTENANCE AND RECOMMENDATIONS

With the aim of preserving the functionality for which signaling systems have been conceived, SEKURECO recommends keeping signs free of dust, dirt or any other or object that prevents the visibility and identification of them.

For its cleaning, it is advisable to use soap solutions preferably, avoiding the use of solvents or abrasive products that may deteriorate the surface of the signal.

The working temperature should not exceed 45o C. Higher temperatures can deform the supporting material.

GARANTIA

SEKURECO offers in this product the legal guarantee of 2 years contained in Law 23/2003, of 10 July, of Guarantees in the Sale of Consumer Goods.

NORMATIA

EN ISO 7010 2012 - Graphical symbols and colors for safety signs for accident protection, fire control and emergency evacuations.

ON SEKURECO

Job security experts! We are a young company that emerges in 2016 thanks to the passion of several technicians specialized in prevention and occupational safety and to the lack of a company specialized in the sector. It offers a win of more than 10 thousand products specialized in labor protection, at the disposal of companies and individuals, of the best brands and at the most competitive prices of the market.