Surface Conditioning abrasive disc SC-DR 76 mm, A Coarse Scotch-Brite (SC-DR) 75mm (25 units) 3M

For the purposes of this Regulation, the following definitions shall apply: 3M. What. The Surface Conditioning Scotch-Brite Roloc disc combines our durable nonwoven disc with the efficient Roloc Quick Change hook system to facilitate effective cleaning, finishing, homogenization and shaving tasks. These discs have nonwoven fiber that adapts well to irregular surfaces.

Use the Surface Conditioning Scotch-BriteTM RolocTM disc to perform a wide range of tasks, including roughing, shaving and finishing. Our nonwoven discs use aluminum oxide and are made with a fiber that adapts well to preserve contoured or uneven surfaces. In addition, they are combined with the coupling system 3MTM RolocTM Quick Change that holds the disc during blunt cutting tasks and facilitates disc change. The open mesh fiber of the discs generates less heat and resists molding, while reducing the risk of discolouration or flaking. Aluminium oxide abrasives offer fast cutting and a uniform finish. Aluminum oxide, being a durable and resistant abrasive, is continuously fractured as it is used to expose new sharp cutting edges.

In comparison, traditional abrasives such as garnet wear out quickly with use. Due to its high cutting power, hardness, strength and low heat retention, aluminum oxide mineral is a common choice for grinding, sanding and finishing applications. It is ideal for use on a wide variety of substrates, both in woodworking and metallurgy, including iron alloys. Scotch-BriteTM surface conditioning products incorporate abrasives in synthetic or non-woven nylon fibres.

The combination of abrasives and fibres creates an abrasive system that delivers uniform results throughout the product life. The fibers are embodiment-resistant and preserve the high cutting performance of abrasive minerals by limiting fiber clogging, which also extends the disc's service life. The discs 3M Roloc TR Quick Change are smaller discs that feature a plastic threaded screw or button designed to be quickly and easily screwed to a Roloc TR* disc belt so that the disc can be comfortably changed with a simple unscrewing and screwing action. The Roloc TR system allows the discs to be securely fixed even in intense applications.

In addition, the range of discs 3M Roloc available allows you to switch from one application to the next in a matter of seconds. * Sold separately

Confirm in advance with Sekureco.eu date of supply approx.

CHARACTERISTICS

• The adaptive nonwoven disc with Roloc support offers a forceful cut.
• Use the Surface Conditioning Scotch-Brite Roloc disc to perform a wide range of tasks, such as roughing, shaving and finishing.
• Our nonwoven discs use aluminum oxide and are made with a fiber that adapts well to preserve contoured or uneven surfaces.
• In addition, they are combined with the coupling system 3M Roloc Quick Change that holds the disc during blunt cutting tasks and facilitates disc change.
• Aluminum oxide abrasives offer fast cutting and a uniform finish.
• Scotch-Brite surface conditioning products incorporate abrasives in synthetic or non-woven nylon fibres.
• The discs 3M Roloc TR Quick Change are smaller discs that feature a plastic threaded screw or button designed to be quickly and easily screwed to a Roloc TR* disc belt (sold separately) so that the disc can be changed comfortably with a simple unscrewing and screwing action.

BENEFITS

• It allows for uniform finishes thanks to its open mesh construction that resists the mould and works without heating.
• The practical Roloc coupling system 3M it offers a quick and easy disc change for polyphase finishing processes.
• The open mesh fiber of the discs generates less heat and resists molding, while reducing the risk of discolouration or flaking.
• Aluminum oxide, being a durable and resistant abrasive, is continuously fractured as it is used to expose new sharp cutting edges. In comparison, traditional abrasives such as garnet wear out quickly with use.
• The combination of abrasives and fibres creates an abrasive system that delivers uniform results throughout the product life.
• The fibers are embodiment-resistant and preserve the high cutting performance of abrasive minerals by limiting fiber clogging, which also extends the disc's service life.
• The Roloc TR system allows the discs to be securely fixed even in intense applications. In addition, the range of discs 3M Roloc available allows you to switch from one application to the next in a matter of seconds.

TECHNICAL DATA

WHAT KIND OF WORK IS APPROPRIATE

• For a variety of tasks, such as grinding, shaving and finishing.
• The abrasive disc is ideal for use in the following sectors: Aerospace Industry, Industry, Boating, Metallurgy, MRO, Transport and Heavy Equipment.
• Resilient nonwoven discs allow for hard-working shaving and finishing.
• It is ideal for use on a wide variety of substrates, both in woodworking and metallurgy, including iron alloys.

SAFETY AND STORAGE CONDITIONS

Store in the recommended conditions of (16-26°C / 35-50% rH) with a rotation “ first in – first out”. Temperature and humidity conditions outside these ranges should be avoided.

Please take into account all local safety regulations and industry standards. Always wear appropriate Personal Protective Equipment (PPE) and follow the safety precautions set out in the associated product safety data sheet. These Product Safety Data Sheets are included with the product and can also be found online at www.3M.com This product should be used with accessories, e.g 3M RolocTM Type TR, TS or TSM and disc holders 3M (Hook-and-Loop) as specified.

ABOUT 3M

3M it has solutions so diverse that they have the right answer for every need. And if not, they work alongside the customer to develop that new way of doing things. This different way of thinking is shown in studies developed to find the most optimal product for each organization.