Chlorinated and powder-free disposable glove TEGERA 84303

Single-use nitrile glove for tasks requiring touch and grip, with textured fingertips and a thickness of 0.06 mm. Powder-free and chlorinated for easier donning. Suitable for users alternating between handling and using touch screens in environments with oils and greases.

FEATURES

• 0.06 mm thick nitrile
• Textured fingertips for improved grip
• Powder-free
• Chlorinated
• Suitable for use with touch screens
• Resistance to oils and greases
• Waterproof
• Suitable for food handling

BENEFITS OF TEGERA 84303 GLOVES

Allows for good sensitivity in the fingers and a more stable grip on parts and tools thanks to the texture on the fingertips. The powder-free finish and chlorinated treatment help with easier donning and doffing during frequent use. Being waterproof and resistant to oils and greases makes it practical for tasks involving contact with wet dirt or grease, without losing precision in handling.

USES AND APPLICATIONS: WHAT IT IS SUITABLE FOR

Suitable for precision work and general handling where a barrier against splashes and occasional contact with chemicals is needed, as well as for operations involving oils and greases. It is also suitable for food preparation and handling, and for tasks where glove use is combined with touch screen devices.

TECHNICAL DATA

• Material: nitrile
• Thickness: 0.06 mm
• Length: 240 mm
• Color: blue
• Interior finish: chlorinated
• With powder: no
• Latex-free: yes
• Size range (EU): 6, 7, 8, 9, 10, 11
• Intended use: single use
• Compatibility: touch screens
• Suitable for food contact: yes
• Resistance: oils and greases
• Waterproof: yes
• Chemical protection (tests): Type B (KPT code)
• Permeation (EN ISO 374-1): K (sodium hydroxide 40%) level 6; P (hydrogen peroxide 30%) level 3; T (formaldehyde 37%) level 2
• Origin: China

REGULATIONS AND CERTIFICATIONS

These standards describe requirements and tests commonly used for protective gloves against chemical and microbiological hazards.

• EN ISO 21420:2020: general requirements for design, safety, sizing, and marking for protective gloves.
• EN ISO 374-1:2016/A1:2018 Type B (KPT): permeation tests against chemicals; type B indicates that defined performance levels are achieved for at least 3 substances, and the KPT code identifies the specific substances tested.
• EN ISO 374-5:2016 (VIRUS): test for resistance to microorganism penetration, including the “VIRUS” pictogram when applicable according to product marking.
• EN ISO 374-4:2019: method for assessing material degradation due to contact with chemicals.
• EN 16523-1:2015+A1:2018: test method to determine the material's resistance to permeation through continuous contact with chemicals.

FREQUENTLY ASKED QUESTIONS ABOUT TEGERA 84303 GLOVES

Are Tegera 84303 gloves suitable for work with oils and grease (light mechanics, maintenance, cleaning)?

Yes. They are designed to handle oils and greases and, being waterproof, they help when there is wet dirt or splashes. For prolonged exposure to chemicals, it is advisable to adjust use according to the type of substance and contact time.

Can they be used with a mobile phone or touch screen without removing them?

Yes. They are suitable for use with touch screens, allowing for specific operations (calls, data entry, reading) without removing them.

How do I choose the size and what happens if they are too loose?

They are made in EU sizes 6 to 11. Choosing a size that fits well improves control and reduces the risk of snags; if they are too loose, precision is lost and it may hinder fine tasks.