"Disabled Refuge Zone" sign

Sign "Disabled Refuge Zone" luminescent SEKURECO. It is an emergency and evacuation sign, made from a 0.7mm and 1mm PVC sheet and 0.5mm Aluminum with a photoluminescent pigment layer (after absorbing light, the product emits it in the dark, so it does not require any electrical source and can be charged an indefinite number of times).

The sign is used to indicate the space designated for sheltering people in emergency situations. Suitable for industrial use.

FEATURES

• White lacquered aluminum with a thickness of 0.6mm
• Stability with Ta < 55°
• Negligible water absorption (0.04, - 0.01)%
• No appreciable lead or phosphorus content (less than 0.01%)
• Non-toxic

MINIMUM LUMINESCENCE VALUES AFTER SALT CHAMBER

CLASS A:

CLASS B:

FOR WHAT TYPE OF WORK IT IS APPROPRIATE

They must be installed in areas directly affected by sunlight or within the influence zone of luminaires. A sign installed in a poorly lit area will not perform well.

BENEFITS

• High adhesion and resistance ink

TECHNICAL DATA

• UNE23033/1:2019 (Extinction)
• UNE23033/2:2019 (Installations)
• UNE 23034/1998 (Evacuation)
• UNE 23035-1/2003
• UNE 23035-4/2003
• UNE 53127/2002
• UNE EN ISO 7010: 2012
• RD314//2006 (CTE)

RIPCI2017 (Extinction)

STORAGE, CLEANING, AND CONSERVATION

The working temperature should not exceed 45º C. Higher temperatures may deform the supporting material.

The optimal storage temperature should be between 15º C and 25º C; with a humidity of 10/50%.

Cleaning methods; avoid using abrasive products. It is recommended to clean them with water and neutral detergents.

MEASUREMENTS

CLASS A (PVC 1 mm)

• FA11473............. 320X160 mm

CLASS A (Aluminum 0.5 mm)

• FA11973............. 320X160 mm

CLASS B (PVC 0.7 mm)

• B11173............. 320X160 mm