Safety rope for work at semi-static height ø11mm Irudek 10150

• For height, connection and positioning
• Semi-static connection ø11mm
• He owns two plastic waterwheels
• Resistance: > 22 kN

TECHNICAL DATA

• Length: 5 feet
• Weight: 186 grams
• Resistance: > 22 kN
• Shelf life: 10 years
• Diameters and widths:

• Rope: polyamide
• Manufacture from materials of any heading

PACKAGING

• Unit/ box: 50
• Length: 1.5 meters
• Packing length: 23 cm
• Packaging width: 15 cm
• Height of packaging: 4 cm

BENEFITS

Semi-static rope for making connections on it or using it as fasteners. Since they do not include energy absorbers, they cannot be used as anti-fall systems.

APPLICATIONS

The use of the mooring element with an anti-rolling subsystem shall be compatible with the instructions for use of each component of the system and with the standards: EN 355, EN 361, EN 362.

Indicated for work at heights, it is therefore often used in work environments such as:

• Civil works
• Construction industry
• Mountaineers
• Industry as a whole

STANDARDS AND REGULATIONS

IN 354 - Personal fall protection equipment. Mooring equipment

RESTRICTIONS ON USE

- The equipment must be individually attributed to one person. - It is recommended that the anchorage point where the anti-fall system will be fixed be above the user. The anchorage point shall have a minimum static resistance of 12 kN and shall comply with the requirements of EN 795. - Personal protective equipment must not be worn by persons whose state of health may affect the safety of the wearer under normal conditions of use or in an emergency. - Personal protective equipment should only be used by a person trained and competent in its safe use.

LIFETIME

The estimated service life of the equipment is 11 years from the date of manufacture (1 year of storage and 10 years of use). The following factors may reduce the shelf life of the product: heavy use, contact with chemicals, particularly harsh environments, exposure to extreme temperatures, exposure to ultraviolet rays, abrasion, cuts, heavy impacts, or poor use and maintenance. The mandatory annual review shall validate the correct operation of the equipment. The equipment must be examined by the manufacturer or an authorised person at least once a year. If a fall has been stopped, the equipment must be withdrawn from use.

MAINTENANCE INSTRUCTIONS

• CLEANING: Personal protective equipment must be cleaned in such a way as not to cause adverse effects on the materials used in the manufacture of the equipment. For textile and plastic materials (tape, rope) clean with a cotton cloth or brush. Do not use any abrasive material. For deep cleaning, wash the equipment at a temperature between 30oC and 60oC using a neutral detergent. For metal parts with a damp cloth. If the equipment gets wet, either from use or from cleaning, it should be allowed to dry naturally away from direct heat.
• STORAGE: Personal protective equipment should be stored in a loose package in a dry, ventilated place, protected from sunlight, ultraviolet rays, dust, sharp-edged objects, extreme temperatures and harsh substances.

ABOUT IRUDEK

Irudek Group is an expanding group of companies with headquarters in Spain, operations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is safety and guarantee, backed by years of experience and by customers who have placed their trust in its products.