Shoulder type welding apron WELDAS Golden Brown

Apron with sleeves in Golden Brown suede leather.

- Cowhide seraje from the coast

KEVLAR® 3 capas

CHARACTERISTICS

• Coastal cowhide leather
• Skin thickness: min. 1 mm.
• Self-balancing belt system
• In KEVLAR® 3 ply threads

MATERIALS

Side cowhide suede combined with 305 gr./m2 of flame-retardant fabric (44-5530 + 44-5600: grain cow leather) is used with 3 threads of KEVLAR® for the manufacture of this product, as well as insulated buttons and hook and loop fastening materials for closures and reinforcements. DuPont™ and KEVLAR® are trademarks or registered trademarks of Nemours and Company.

APPLICATIONS

This product is designed to be used in all arc welding processes, such as MMA, MIG/MAG, TIG, micro plasma, spot welding, and gas welding, as well as plasma spraying and oxy-fuel cutting, gouging, arc welding, and thermal welding. Since applications vary, it is the user's responsibility to identify the appropriate product for each application.

SIZES

	You are trained on data up to October 2023.	M	L	XL	XXL	XXXL	XXXXL
	44	48	52	56	60	64	66
A	166-170	171-176	177-182	183-187	188-192	193-196	197-200
B	98	100	112	124	136	148	160
C		90-98*	96-104*	98-120*	106-132	108-144	114
* = art.nr. 44-2600

PACKAGING AND STORAGE

1 unit

Store in a dry, dark place at temperatures between 10˚ and 20˚ Celsius. Do not stack more than 5 boxes on a pallet.

INSTRUCTIONS FOR USE

This product is designed to be used in all arc welding processes, such as MMA, MIG/MAG, TIG, micro plasma, spot welding, and gas welding, as well as plasma spraying and oxy-fuel cutting, gouging, arc welding, and thermal welding. Since applications vary, it is the user's responsibility to identify the appropriate product for each application.

This flame-resistant cotton/leather workwear will be used for general work activities as well as welding. The user must ensure that all closures are fastened, especially for use with welding applications, and to choose the correct size. If any molten metal sticks to the clothing, the user must remove it immediately. The user must always wear the bib in combination with a welding jacket. The welding jacket 33-3060 can only be used with an additional neck protector. Additional protective garments (apron, sleeves, spats) should only be used with the welding suit. The spats should be worn over welding shoes. If the user notices symptoms similar to sunburn, UV rays are passing through the product. In this case, the product must be repaired or replaced. Therefore, the user should be aware that they will need more layers of protection in the future.

HEALTH INFORMATION

The pH, chromium (VI), and PCP levels of all materials have been tested and comply with CE health standards. Coloring: The coloring is carried out using natural materials.

STANDARDS/ REGULATIONS

EN ISO 11611:2007 Clase 2/A1

TÜV BP 60079303 0001

TÜV 21190228 001