Adhesive Signage Materials that pollute the sea 105x 90 mm COFAN

The adhesive signage "Materials that contaminate the sea" clearly identifies the places where substances that could affect the marine environment are handled and stored. Thanks to its high-quality adhesive, this sign stays firmly in place, even in adverse conditions such as humidity or rain. Additionally, its clear and easily recognizable design makes it visible from a safe distance, contributing to maintaining safety in the workplace or in transit areas.

The AD material sign consists of a pictogram at the top in black on a white background. The design of the sign may vary, but in no case will its meaning change.

Among the most common technical characteristics of COFAN signals are:

• Form:It is usually a circle with a pictogram and text.
• Size:It can vary depending on the size and location of the work area.
• Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to alert about dangerous behaviors.
• Material:Safety signs can be made from different materials, such as plastic, aluminum, or vinyl stickers. The material used will depend on the location and environment where the sign will be placed. For example, if the sign is placed in an area with a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.

PVC ADHESIVE SIGN (STICKER)

The signs are made on a sheet of glossy white monomeric calendered vinyl self-adhesive.

A color coating is applied to it using screen printing techniques.

The adhesive is protected against the elements by a glossy transparent calendered laminate.

Our products areNO TOXIC, NO RADIOACTIVE, NO COMBUSTIBLE, and RESISTANT TO AGING.

Description:

• TRANSPARENT LAMINATION WITH A GLOSSY FINISH0.8 mm. Transparent calendered PVC film with monomeric plasticizer, cadmium-free, with UV filter.
• COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.
• SELF-ADHESIVE VINYLOf 0.08 mm made of white PVC resin. Adhesive on the back.

MONOMERIC SELF-ADHESIVE VINYL SUPPORT

Printable digital vinyl sheet, calendered monomeric (80µ) glossy white self-adhesive.

Removable water-based acrylic adhesive that allows you to fix and remove the application with very light pressure from your fingers, and then lift and reposition it if necessary (this characteristic is lost when excessive pressure is applied).

COLOR LAYER INKS

Color layer (according to signal requirements) using UV radiation-curable screen printing inks for versatile use on various plastics.

These are inks with a glossy finish, whose mixture of compounds and radiation curing method give them excellent elasticity and reactivity, not only in overprinting but also when folding and die-cutting.

Mixture of oligomers, monomers, photoinitiators, and pigments.

The ink contains the following hazardous elements:

• Hexamethylene diacrylate

• Isobornyl acrylate

• Oxydibis(methyl-2,1-ethanediyl) diacrylate

• 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

105 x 90 mm

APPLICATIONS

Some of the industries where we can find this type of signals are:

Fishing industry

Oil industry

Chemical industry

Pharmaceutical industry, among others.

It can also be used in ports, docks, and coastal areas where loading and unloading operations of hazardous materials take place.

INSTALLATION / LOCATION / PLACEMENT OF SIGN

Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To properly place a mandatory sign indicating that the use of gloves is required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a location where it cannot be obstructed by other objects or signs.

TheFIXATIONThe signaling element must be placed on a firm surface that is free of dirt.

The signal can be secured by means ofMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(mounting adhesive, glues, silicones...) carefully, avoiding dirtying the visible surface or deforming it.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signs free of dust, dirt, or any residue or object that may obstruct their visibility and identification.

For cleaning, it is recommended to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the sign.

The working temperature should not exceed 45º C. Higher temperatures may deform the supporting material.

WARRANTY

SEKURECO offers in this product the legal warranty of 2 years established in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.

REGULATIONS

EN ISO 7010 2012 - Graphical symbols and colors for safety signs for accident prevention, fire fighting, and emergency evacuations.