Cutting and polishing brush 100mm x 100mm x 19mm A Medium Scotch-Brite (2 Units) 3M

Cutting and polishing brush 100mm x 100mm x 19mm Scotch-Brite (2 Units) 3M. The Scotch-Brite Finishing Laminate Brush is manufactured from sections of nonwoven material cut lengthwise and bonded to a cylindrical core. Our laminated brushes are available with aluminum oxide that continually provides fresh abrasives to produce consistent finishes every time.

Cut & Polish Scotch-Brite™ laminated brushes use Scotch-Brite's exclusive "non-woven" material technology 3M™. Our brushes feature an open mesh construction that helps limit downtime and increases productivity by reducing clogging and maintaining more effective cutting action for longer, resulting in less frequent replacement than with conventional brushes. . Nonwoven technology makes Scotch-Brite industrial abrasives unique. The combination of fiber strands, resin and abrasive mineral forms a thick, open mesh. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, stains and contaminants without altering the geometry of the workpiece, reducing the need for rework and increasing the productivity. Holes in the mesh allow chips to escape so debris does not clog the ore. The mesh fibers continuously break down with use to reveal new mineral and deliver exceptional uniformity, superior cutting performance and extremely long life. Scotch-Brite products not only improve productivity, but also improve operator safety by reducing the need for cleaning chemicals and pastes. In addition, they replace metal brushes that can break and cause damage. From cosmetic finishing to weld grinding, deburring, etc., Scotch-Brite abrasives work quickly and deliver consistent results, part after part.

The Scotch-Brite™ Cut & Polish Laminated Brush is used as a versatile, high-performance alternative to conventional pin brushes and complicated compounds. Our Cut & Polish laminated brushes offer better uniformity and greater control in a number of critical metal preparation and finishing tasks.

Confirm in advance with Sekureco.eu delivery date approx.

CHARACTERISTICS

• Aluminum oxide mineral cuts quickly and sharply on tough cleaning tasks and shiny finishes.
• It is available in fine and medium grain, so you can choose the desired finish.
• It is ideal for cleaning, deburring, polishing and finishing tasks. The open mesh is resistant to clogging, which limits debris buildup and the mineral can cut faster for longer.
• Adaptive nylon fibers respond to surface irregularities without scratching the surface, helping to maintain the geometry of the original part.
• This mineral creates a strong, durable abrasive that self-fractures during use to expose new sharp cutting edges, while traditional natural abrasives wear more quickly.
• Scotch-Brite abrasives are unique surface conditioning products that incorporate abrasives in a nonwoven fiber matrix.
• The combination of abrasives and nonwoven material creates an abrasive system that offers consistent results throughout the life of the product.
• The open mesh material generates less heat and is resistant to clogging, preserving the high cutting performance of abrasive minerals by reducing fiber clogging.

SPECIFICATIONS

BENEFITS

• The soft density and medium, fine and very fine abrasive grains allow for compound-free brushed surfaces.
• Offers more surface contact than bristle brushes.
• In addition, it continually provides new abrasives to always achieve uniform finishes.
• The non-woven mesh is resistant to clogging and heat, providing fine finishing results on a variety of materials.
• Achieve decorative finishes in metal, wood and composites.

APPLICATIONS

• Due to its cutting power, hardness and solidity, its use is widespread in grinding, sanding and finishing operations. Aluminum oxide is suitable for a wide variety of materials, whether woodworking or metal work, including iron alloys.
• These brushes are ideal for finishing and preparation tasks such as brushed finishes on copper, brass, stainless steel, aluminum and other metals.
• They are suitable for aesthetic finishing applications, softening of wood fibers, compaction of wood, plastic, composite surfaces and sanding of putties.

SAFETY AND STORAGE CONDITIONS

Store under recommended conditions of (16-26°C / 35-50% rH) with a “first in – first out” rotation. Temperature and humidity conditions outside these ranges should be avoided.

Safety: Please observe all local safety regulations and industry standards. Always use appropriate Personal Protective Equipment (PPE) and follow the safety precautions indicated on the associated product safety insert. These Product Safety inserts are included with the shipped product and can also be found online at www.3M.com This product must be used with accessories 3M RolocTM type TR, TS or TSM or Hook-and-Loop plates as indicated.

VIDEOS

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.