Double lashing element in Y energy absorber for scaffolding hook 50mm

• Energy absorber with double Y-shaped safety cord for work on 10,5 mm diameter ABM SCF scaffolding with eyelets at its ends.
• Approved for use in potentially explosive areas
• The material:

Manufacture from materials of any heading, except that of the product
For the purposes of this Regulation, the following definitions shall apply:

• Maximum elongation of the energy absorber: 0,7 m
• For the purposes of this Regulation, the following definitions shall apply:
• This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union

--------------------------------------------------------------------------

Work at height, as well as all work carried out in confined spaces and underground in ditches, excavations or wells, presents a present risk to workers other than falling from a different height, which could have serious health consequences for workers who could be seriously injured or even killed if they rushed. For this reason, it is necessary to intensify prevention measures by ensuring that each operator has access to the necessary equipment Personal protective equipment it is therefore important to ensure that the safety of workers is not compromised. One of these elements is the Double mooring element in and energy absorber for scaffold hook 50mm.

The Double mooring element in and energy absorber for scaffold hook 50mm is an energy absorber with a double safety "Y" wire rope for work on 10,5 mm diameter ABM SCF scaffolding and eyelets at its ends. It is approved for use in potentially explosive areas. The material of the safety rope is polyester, while the energy absorber is nylon. The maximum elongation of the energy absorber is 0,7 m.

The anchorages may not be used alone as a fall arrest system unless specifically indicated by the manufacturer. In this way, an absorber is required next to the mooring element, and the assembly must have a maximum total length of two metres, always bearing in mind that these components must be compatible with each other and the absorber manufacturer must clearly indicate the types of connection elements to which his product can be connected.

Mooring elements are essential in many work environments to ensure the safety of workers while performing their work at height. These components must always be in good condition and must not show any kind of deterioration or damage which could cause them not to function properly and create a hazardous situation for workers. Therefore, if any anomaly is detected, the element should be replaced by a new one.