Prohibited sign for the use of high-heeled shoes SEKURECO

Signal of The use of high-heeled shoes is prohibited. SEKURECO. The sign is used in workspaces where wearing high-heeled shoes or platforms poses a danger to people in the work environment, thus aiming to inform users to prevent workplace accidents. The sign is available in three different materials and sizes to choose from, according to the needs of the industry.

In the context of workplace safety, it is common to prohibit the use of high-heeled shoes in certain work areas, especially in those where there is a higher risk of accidents or injuries. This is because high-heeled shoes can hinder movement and balance, increasing the risk of falls and other accidents. Therefore, if you work in an environment where special footwear is required for safety reasons, it is important to follow the established recommendations and rules to avoid potential risks.

Among the most common technical characteristics of obligation signals with SEKURECO UV inks are:

• Form:It is usually a circle with a pictogram and text.
• Size:It can vary depending on the size and location of the work area.
• Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to alert about dangerous behaviors.
• Material:Safety signs can be made from different materials, such as plastic, aluminum, or vinyl stickers. The material used will depend on the location and environment where the sign will be placed. For example, if the sign is placed in an area with a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.

GLASSPACK PVC SIGNAL: DESCRIPTION

The signals ofGLASSPACKOf0.7 mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protective coating is applied using screen printing techniques.

Our products areNO TOXIC, NO RADIOACTIVE, NO COMBUSTIBLE, and RESISTANT TO AGING.

• SUPPORT:GLASSPACK SHEET of 0.7 mm (semi-rigid PVC) in glossy white color.
• COLOR LAYER:Of screen printing inks cured by UV radiation for versatile use. BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.BRIGHT FINISH, SIGNAL PROTECTION AGAINST UV RAYS.

PVC ADHESIVE SIGN (STICKER)

The signs are made on a sheet of glossy white monomeric calendered vinyl self-adhesive.

A color coating is applied to it using screen printing techniques.

The adhesive is protected against the elements by a glossy transparent calendered laminate.

Our products areNO TOXIC, NO RADIOACTIVE, NO COMBUSTIBLE, and RESISTANT TO AGING.

Description:

• TRANSPARENT LAMINATION WITH A GLOSSY FINISH0.8 mm. Transparent calendered PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
• COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.
• SELF-ADHESIVE VINYLOf 0.08 mm made of white PVC resin. Adhesive on the back.

SEMI-RIGID PVC SUPPORT - GLASSPACK

Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with UV-curable inks in offset.

MONOMERIC SELF-ADHESIVE VINYL SUPPORT

Digital printable calendered monomeric vinyl film (80µ) glossy white self-adhesive.

Water-based removable acrylic adhesive that allows you to fix and remove the application with very light finger pressure, and then lift it and reposition it if necessary (this characteristic is lost when excessive pressure is applied).

COLOR LAYER INKS

Color layer (according to signal requirements) using UV radiation curable screen printing inks for versatile use on various plastics.

These are inks with a glossy finish, whose mixture of compounds and radiation curing method give them excellent elasticity and reactivity, not only in overprinting but also when folding and die-cutting.

Mix of oligomers, monomers, photoinitiators, and pigments.

The ink contains the following hazardous elements:

You are trained on data up to October 2023. Hexamethylene diacrylate

You are trained on data up to October 2023. Isobornyl acrylate

You are trained on data up to October 2023. Oxydibis(methyl-2,1-ethanediyl) diacrylate

You are trained on data up to October 2023. 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

VINYL ADHESIVE

100 x 150 mm

150 x 200 mm

200 x 300 mm

PVC GLASSPACK 0.7 mm

210 x 300 mm

300 × 400 mm

ALUMINUM 0.5 MM

210 x 300 mm

300 × 400 mm

APPLICATIONS

This type of signals can be found in environments such as:

Factories

Civil works

Offices

Healthcare industry

Food industry

Manufacturing

Production lines

INSTALLATION / LOCATION / PLACEMENT OF SIGN

Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To properly place a mandatory sign indicating that the use of gloves is required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to position the sign at eye level and in a location where it cannot be obstructed by other objects or signs.

TheFIXATIONThe signaling element must be placed on a firm surface and free of dirt.

The signal can be secured by means ofMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(mounting adhesive, glues, silicones...) carefully, avoiding dirtying the visible surface or deforming it.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signs free of dust, dirt, or any residue or object that may obstruct their visibility and identification.

For cleaning, it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the sign.

The operating temperature should not exceed 45º C. Higher temperatures may deform the supporting material.

WARRANTY

SEKURECO offers in this product the legal warranty of 2 years established in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.

REGULATIONS

EN ISO 7010 2012 - Graphical symbols and colors for safety signs for accident prevention, fire fighting, and emergency evacuations.

ABOUT SEKURECO

Labor safety experts! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and labor safety, and in response to the lack of a specialized company in the sector. We offer more than 10,000 specialized products for labor protection, available to businesses and individuals, from the best brands and at the most competitive prices in the market.