Anchoring kit Irudek TRIP 10

It is the basic anti-fall kit for work in confined spaces requiring an ascent and descent system. The kit consists of:

1 TRIP1 ALUMINIUM TRIPOD WITH 1 PULLEY AND CARRYING BAG REF. THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES

1 20 M TRN1 RESCUE LATHE WITH ATTACHMENT PLATE REF. THIS REGULATION SHALL ENTER INTO FORCE ON THE TWENTIETH DAY FOLLOWING THAT OF ITS PUBLICATION IN THE OFFICIAL JOURNAL OF THE EUROPEAN UNION

ONE FALL GUARD AT 20M. REF. THIS REGULATION SHALL ENTER INTO FORCE ON THE TWENTIETH DAY FOLLOWING THAT OF ITS PUBLICATION IN THE OFFICIAL JOURNAL OF THE EUROPEAN UNION

CHARACTERISTICS OF TRIP1

• Aluminum alloy head: to provide robustness and durability to the equipment.
• Built-in pulley: for more rigid operation of the lathe.
• 2 aluminium anchorage rings: to accommodate up to two equipment (at least 1 anti-fall)
• Aluminum legs: a superior lightness.
• Robust: can withstand loads up to 500 kg.
• Anti-slip tires: for optimum support.
• Seat belts: prevent involuntary movement of the legs.
• Certificate for work in explosive atmospheres ATEX II 2G Ex h II c T6
• Includes carry bag

SPECIFICATIONS TRIP1

• In the case of vehicles of categories M1 and N2
• Diameters (m) 0,8-1,8
• Weight (kg) 13
• Height (m) 1,15-2,15
• Load capacity 500 kg
• Anchor rings 2
• No of pulleys 1
• Total heights 7

TRIP1 MATERIALS

• Aluminium alloy head
• Aluminium rings
• Aluminium feet
• For the purposes of this Regulation, the following definitions shall apply:
• Polyester safety tape

CHARACTERISTICS TRN1

Designed with Ø6,3mm galvanized steel cable, to lower or raise a person into confined spaces. It has an automatic safety brake and locks in case of release of the lever to prevent uncontrolled descent of the user. The rescue lathe shall be used in conjunction with a retractable fall guard (EN 360) to become a fall guard.

SPECIFICATIONS TRN1

• The standard EN 1496
• Weight 14,50 kg
• Cable length 20M
• Maximum weight 140 kg

OTHER

• Plastic wing
• Galvanized steel wire
• Plastic housing
• Steel body

CHARACTERISTICS OF SECURBLOK 

• Robust: High strength synthetic cartridge, offering long durability.
• Safe: for loads up to 140 kg reducing the impact force below 6kN.
• Rotating ring: to prevent entanglement and improve equipment performance.
• Fall indicator: in case of fall the green line turns red, indicating the user's fall.
• Certified for work in explosive atmospheres ATEX.

SECURBLOK SPECIFICATIONS

• In the case of vehicles of categories M1 and N2
• Length (m) 7,5 - 10 - 15 - 20 - 30
• Weight (kg) 3,57 to 3,77 to 6,9 to 7,45 to 12,8
• In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:
• High (mm) 263 - 263 - 320 - 320 - 396
• Length (mm)
• Height (mm)
• Load (kg) 140
• Static resistance 15 kN
• Impact force < 6 kN
• Unlimited useful life

SECURBLOK MATERIALS

• Wire Galvanized Steel (4,5 mm)
• Synthetic cardboard

Lower connector 976

• Aperture 20 mm
• Material Steel
• Resistance 23 kN
• Automatic closure
• Turntable Yes
• Witness fall Yes

Other, of circular cross-section

• 18 mm aperture
• Material Steel
• Resistance 25 kN
• Closing Rosca
• Rotary No
• Witness of fall No

GENERAL CHARACTERISTICS

• 2 ANCHORAGES MADE OF ALUMINIUM
• 8 HEIGHT POSITIONS
• LENGTH MIN.: 1,15M
• LENGTH MAX. TWO AND A HALF
• MAXIMUM APERTURE FULLY
• OPEN Ø1,50M
• MAXIMUM WORKING CAPACITY: 500 KG.

WEIGHT: 13 KG.