Retractable fall arrester with nylon strap and aluminum casing IRUDEK Koala

Brand:

Automatically replaceable nylon tape.

  • Available strap length 3,3m - 6,6m
  • Weight (kg): 3,57 to 3,77
Read moreShow less
€187.42

154,89 € (No tax)

€187.42 (IVA incl.)
€154.89 (Sin IVA)
Discontinued product. - This product is no longer available.
Solicitar más información
<h3 style="text-align: center; margin-bottom: 25px;">Solicitud de información de este producto</h3>

What can I help you?

Length / Height
Reference:
100307700020

SHIPMENTS

from 3,99€ + VAT. Free from €150 +VAT

EXCHANGES AND RETURNS

Free up to 14 days after purchase, excluding personalized and made-to-order products

EXCHANGES AND RETURNS

WE HELP YOU

+34 876 43 01 24
[email protected]

You may also like
Description

A length of not more than 30 mm,3M or 6.6M, aluminum crankcase.

Includes 1 automatic rotary musket with drop indicator + steel musket.

CHARACTERISTICS

  • Resistant: aluminium crank, extremely resistant to shock and corrosion.
  • Box: for maximum loads of 136 kg reducing the impact force to less than 6 kN.
  • Drop indicator on rotary connector 976: in case of fall, the green line turns red, indicating the user's fall.

TECHNICAL DATA

  • Length of strap (m) 3,3 - 6,6
  • Weight (kg): 3,57 to 3,77
  • In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:
  • Height (mm): 500 to 550
  • Width (mm): 107 to 160
  • Thickness (mm): 60 - 60
  • Load capacity (kg): 136
  • For the purpose of this Regulation, the following definitions shall apply:
  • For the purposes of this Regulation, the following definitions shall apply:
  • Shelf life (years): 10 years of use + 1 year of storage from date of manufacture

MATERIALS

  • Tape of nylon 25 mm
  • Manufacture from materials of any heading
  • Connector: Galvanized steel

PACKAGING DATA

  • Length: 3.3m
  • Packed length: 18cm
  • Packed width: 16cm
  • Packed height: 8cm
  • Unit/box: 1

OTHER, OF CIRCULAR CROSS-SECTION

Lower connector 976

  • Aperture: 20 mm
  • Manufacture from materials of any heading
  • Resistance: 23 kN
  • Automatically closed
  • Turntable: Yes
  • Witness of the fall:

Other, of circular cross-section

  • Aperture: 18 mm
  • Manufacture from materials of any heading
  • Resistance: 25 kN
  • Closure: Screw
  • Turntable: Yes
  • Witness of the fall:

REQUIREMENT FOR USE

This product has been designed to be used as an anti-slip device (with a rescue mechanism in some of its specific models) and its use is restricted to persons with the appropriate training and competence to use it safely. It is not intended for use in fixing work, driving or transporting materials.
The correct operation of this product is based on the sudden and rapid deployment of the belt. This product should not be used on unstable ground such as silos, quicksand, dust, mud, etc.
The block shall be placed in such a way as not to obstruct the free movement of the system or the path of the fall. Work directly below the anchorage point as far as possible (maximum 40° from the vertical) to avoid injury from swinging and falling.
You should use this product with extreme caution in the vicinity of harmful chemicals, moving machinery, any electrical hazards, sharp edges and abrasive surfaces. The area must be kept clear within a radius of at least 2 metres.

EUROPEAN AND US REGULATIONS

IRUDEK's equipment and parts for high-altitude fall prevention meet and sometimes even exceed European and American requirements as well as other international standards. This product is accompanied by a user manual in several languages. It is important to read and understand the instructions before using the product. Activities that require the use of this equipment usually involve a high risk. It should therefore only be used by persons with appropriate training or by individuals who have received appropriate training (always under the supervision of a person with appropriate training).
It is the responsibility of the user to understand the correct use of the product, to use it only for the purpose for which it was designed and to carry out all necessary safety procedures. It is mandatory to carry out a risk assessment before using the equipment and to have a contingency plan for work at high altitude. The manufacturer or supplier shall not be liable for any damage, injury or death caused by improper use of the equipment.
It is always important to ensure that all parts are compatible with the safety systems with which they are used and do not impede their proper functioning. If you have any doubts about the compatibility of products you should decide, please consult the manufacturer Do not exceed the weight indicated by the manufacturer or that specified by MBS. Do not modify this product, it may lose its effectiveness.

STANDARDS AND REGULATIONS

  • IN 360

ABOUT IRUDEK

Irudek Group is an expanding group of companies with headquarters in Spain, operations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is safety and guarantee, backed by years of experience and by customers who have placed their trust in its products.

Read moreShow less
Product Details
100307700020

Specific References

ean13
8436028793952

heading

@COMMENT_AVATAR@

@CUSTOMER_NAME@

@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@
☆☆☆☆☆ ★★★★★ (@COMMENT_GRADE@)
@COMMENT_DATE@
@COMMENT_NO_APPROVE@

@COMMENT_TITLE@

@COMMENT_COMMENT@

@COMMENT_IMAGES@
@COMMENT_VIDEOS@
Write a comment
@COMMENT_AVATAR@

@CUSTOMER_NAME@

@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@
@COMMENT_DATE@
@COMMENT_NO_APPROVE@

@COMMENT_COMMENT@

Reply
@COMMENT_AVATAR@

@CUSTOMER_NAME@

@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@
@COMMENT_DATE@
@COMMENT_NO_APPROVE@

@COMMENT_COMMENT@

Reply

Menu