Retractable anti-fall block with 6-10-15m cable - EN360 (ref. CR200)

• Molded housing made of high impact-resistant polymer, to prevent breakage and is virtually indestructible.

• With galvanized steel wire of a diameter of 4 mm and fitted with a rotating hook (AZ002AS aperture 24 mm). Avoid undue rotation of the strap during use or in the event of a fall.

• It complies with EN 360.

• Maximum user weight: 140 kg.
• The test shall be carried out in accordance with the specification of the manufacturer.

---------------------------------------------------

The work at height they require professionals and undertakings to take appropriate prevention and safety measures so that workers can carry out their work properly protected against a possible fall from different heights, the great risk faced by all those professionals who carry out some type of activity in buildings, vertical work, work in confined spaces or in wells, excavations, ditches... These professionals should make use of the opportunities Personal protective equipment (PPE) as well as all the elements that make up the other and necessary for the protection of workers. In this sense, one of the elements which make up this system is the retractable fall guards like the This requirement does not apply in the case of a cable of a length exceeding 6 m.

The This requirement does not apply in the case of a cable of a length exceeding 6 m it has an impact-resistant polymer moulded housing and a galvanized steel wire with a diameter of 4 mm fitted with a rotary hook. It complies with EN 360 and supports a maximum user weight of 140 kg.

The retractable fall guard is a device enabling the worker, when connected to the fall protection system, to carry out his activities freely and with the assurance that the system will stop him if he falls from a different height.

This device is an automatic recovery mechanism which, in conjunction with a restraint, braking or damping system, can be used both indoors and outdoors.

This type of device should be placed at a distance fixed anchorage or mobile that is safe to perform these delicate tasks, with a wide-open connector that makes it possible for them to be directly connected to a structure.

Given the great importance of all these elements in terms of safety, it is essential that both before installation and before use there is a check that the device is in perfect condition and must be subjected to periodic checks established by the manufacturer, replacing it with a new device if it presents any type of deficiency or deterioration that may reduce its effectiveness, with the corresponding danger to the worker.