Fall Protection Harness with 2 Attachment Points, Universal Size, and for Up to 140 kg Weight EN361 - COFAN 11000032

Fall protection harness with 2 external and dorsal attachment points. The thigh part is also adjustable, and the seat strap is ideal for greater comfort and ergonomics when using it. The shoulder and thigh parts are differentiated in two colors. It supports a weight of up to 140 kg. The harness weighs 0.79 kg, making it very light and comfortable to transport. It is made of high-quality polyester fabric.

DESCRIPTION

Fall protection harness intended to be incorporated into a fall arrest system.

This harness is made with 45mm straps and consists of: dorsal and external attachments, sub-gluteal strap, quick buckles at the thigh level, buckles at the shoulder level, and a carabiner. Bicolor, medium size.

MATERIALS

• Straps: polyester
• Buckles: anti-corrosion treatment
• Weight: 1.200 kg

USAGE INSTRUCTIONS

This harness is recommended for all types of work at height (structures, roofs, glass facades, scaffolding, mobile bridges, cranes...). A harness should be fastened with straps as close to the body as possible, without excess, to allow the user to move freely.

The external attachment points should be used in pairs to maintain longitudinal forces in case of a fall and to avoid, as much as possible, asymmetric lateral forces.

USAGE LIMITATIONS

Do not use outside the defined usage instructions in the corresponding section.

Replace the safety harness if there is any doubt about its strength. After a fall, return the harness for inspection to the manufacturer or to a competent person authorized by the manufacturer. Every 12 months, the harness must be inspected by the manufacturer or by a competent person authorized by them. A fall protection harness and a rope do not constitute a fall arrest system.

STORAGE INSTRUCTIONS

The harness should be suspended in a moderately dry and ventilated area, protected from sunlight and rodents.

CLEANING / MAINTENANCE INSTRUCTIONS

Clean with water and soap using a brush. The belt should then be dried with a clean cloth and suspended in a ventilated area. The metal parts should be cleaned with a cloth soaked in petroleum jelly.

Bleach and detergents are strictly prohibited. The equipment should always be examined before use.

Ensure in particular that there are no:

- straps: any signs of cutting, burning, rust stains, or abnormal shrinkage.

- stitching: no visible damage.

- metal elements: no signs of oxidation or deformation. Additionally, ensure that the operation of the carabiners is correct.

TECHNICAL QUALITIES

In accordance with the requirements of European Directive 89/686, particularly in terms of design, manufacturing, and testing methods, and to standard EN361.

NORMATIVE

- EN361: The EN361 standard is a European standard that establishes the safety requirements and tests that full body harnesses used as personal protective equipment against falls at work must meet. This standard ensures that harnesses are safe and meet certain quality standards to protect workers performing tasks at height.

APPLICATION

• Construction
• Carpentry
• Climbing

EU DECLARATION OF CONFORMITY

The company COFAN LA MANCHA, S.A., located at Avda. de la Industria, S/N, 13610 CAMPO DE CRIPTANA (Ciudad Real) SPAIN, with N.I.F. A-13342621 declares under its sole responsibility for the personal protective equipment described below, based on internal production control and in accordance with harmonized standards.

FALL PROTECTION HARNESS WITH TWO ATTACHMENT POINTS, CAT.III,

is in compliance with the applicable EU harmonization legislation: European Regulation EU 2016/425, is identical to the PPE subject to EU type certificate No. 2777/10711-01/E13-01 issued by SATRA TECHNOLOGY EUROPE LIMITED, located at Bracetown Business Park, Clonee D15YN2P, Republic of Ireland. Notified body No. 2777, and has undergone the established evaluation procedure and meets the requirements for standard EN 361:2002 EN 358:1999 based on Regulation (EU) 2016/425.

CE TYPE APPROVAL CERTIFICATE – No. 3240 Issue 1 Extension 1

SATRA Technology Centre, Wydham Way, Telford Way, Kettering, Northamptonshire, NN16 8SD, United Kingdom - Authorized Body Identification Number: 0321

Declares that the product with reference 1100 0032 with the following characteristics:

Product reference 1100 0032

Description

Harness made of silver and black straps with a width of 44mm, a D-ring at the front and another at the back for grip. Adjustable shoulder straps, comfort thigh straps.

Technical report: SATRA SPC0150380/0714

has been subjected to CE type tests in accordance with Article 10 of the PPE Directive (89/686/EEC) and has passed the provisions related to complex category through:

i. Testing in accordance with standard EN361:2002

ii. Relevant tests of technical documentation

These products are approved to display the CE mark in accordance with Article 13 of the Directive (89/686/EEC).

Therefore, it is authorized to mark the mentioned products in accordance with Article 13 of the Directive (89/686/EEC) and any relevant modifications once a CE declaration of conformity for the product has been drafted. Please note that:

1. Complete product details and the certificate are included in the manufacturer's technical data sheet.

2. This certificate is valid only if it bears the text – “SATRA - European Authorized Body 0321”

3. This certificate is issued in accordance with the conditions detailed on the reverse.

4. The "CE" marking also depends on the current compliance with Article 13 of Directive 89/686/EEC.