Fall arrest harness P80 belt - EN 361, EN 813 and EN 358

• Front and back anchorage.
• Front anchorage points by belt.
• Anchorage point for seated/suspended position.
• Work positioning belt.
• The front adjustment buckle.
• Regulation on shoulders and thighs.
• Side anchorages in the belt.
• Manufactured from straps 45 mm wide.
• Automatic connectors of aluminium type "click".
• Size M-XL 1.720 grams.
• Size XXL 1,800 grams.

-----------------------------------------------------

People who do some kind of work at height are exposed to the possibility of falling from different heights, one of the greatest risks in the field of occupational accidents, which can have a fatal outcome for the worker or cause serious health problems in the form of injury. It is therefore essential to make use of Personal protective equipment (PPE) adequate to protect the user, and must make use of a other that it is effective and properly performs its task. The In the case of vehicles with a maximum mass not exceeding 2000 kg: it's one of the best options on the market.

The In the case of vehicles with a maximum mass not exceeding 2000 kg: is a device which complies with three regulations in force and which has front and back anchorages, front anchorages by belt, anchorages for sitting or suspended position, work position belt, front adjustment buckle, shoulder and thigh adjustment, side anchorages in belt and automatic aluminium "click" connectors. The other, of circular cross-section is manufactured with 45 mm wide straps.

The purpose of the other, of circular cross-section is to support and brake the worker's body in certain jobs where there is a risk of falling, thus avoiding the consequences of falling, such as adequate braking force to avoid bodily injury, minimum fall distance, user posture after braking, etc.), a type of protection to be used in all those cases where the risks of falling from a height cannot be avoided by means of collective protection.

Holding systems in the working position are intended to support the operator at height and must not be used in any case to stop falls. It should also be borne in mind that a belt, with or without incorporated mooring elements, does not protect against falls from a height. One other it consists of a harness, a connecting component and a mooring element.

The harness may consist of fasteners, bands, buckles and other elements which must always be fitted and arranged in an appropriate way on the worker's body to hold him during the fall and after the fall has stopped. These harnesses should be of the highest quality and should be replaced with a new one if they are damaged.