X-shaped safety harness with padding 3M It shall not be used for the manufacture of other products

The safety harness 3M DBI-SALA ExoFit is designed with a single X-shaped piece that wraps around the shoulders and back for easy donning without tangling, providing safety and comfort.

• Includes a comfortable and practical work positioning belt to keep your hands free when using with positioning lanyards Breathable padding helps you work safely
• A single X-shaped piece that wraps around the shoulders and back
• Easy to install without getting tangled

Confirm in advance withSekureco.euDelivery date approx.

CHARACTERISTICS

• The harness has breathable padding and soft edges.
• Padding on shoulders, hips and legs is integrated to reduce slipping and back padding is made of ripstop ballistic nylon.
• An easy-to-use tongue and buckle system and spring-loaded front torso adjusters help provide a good fit.
• Covered identification tags help protect important information for the life of the harness.

BENEFITS

• Breathable padding helps you work safely and comfortably.
• A single X-shaped piece that wraps around the shoulders and back.
• Easy to place without getting tangled.
• Spring-loaded front torso adjuster for quick and easy adjustment.
• Quick connect buckles allow you to connect quickly, easily and securely.
• Padded leg and hip straps.
• Anti-tear ballistic nylon back padding.
• Covered ID tags.

RECOMMENDED APPS

Work at height comfortably and protected with the harness 3M DBI-SALA ExoFit. Recommended for Construction, Mining, Oil and Gas

TECHNICAL DATA

Improved webbing:Abrasion resistant and water repellent to reduce the generation of mold and dirt.

Sling hook housings:Avoid having to carry the sling in your hand when not in use.

Comfort pads: On the underside of the shoulder, hip and leg straps. TM® Harness 3M DBI-ROOM

Quick Connect Buckles: Lightweight aluminum alloy buckles for quick and easy connections. (There are also models with a through buckle).

Vertical dorsal D-ring:The vertical dorsal D-ring ensures quick, easy and secure connections to your fall arrest system. Rigid belt: Allows you to carry 27 kg of tools without breaking. Protected Tags: Protected harness tags with hook and hold closure.

INSTRUCTIONS FOR USE - ADJUSTMENT OF THE FALL RESISTANT HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, items carried in your pockets can become trapped between the webbing of the harness and the user's body, causing injury. Always refer to the instructions for use supplied with the specific harness regarding proper installation and adjustment.

Step 1. Begin. Hold the harness by the dorsal D-ring, which is often secured through a D-pad, and make sure the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it over your shoulders. Make sure no straps are tangled and they are hanging freely.

Step 3. Leg straps. Place it between your legs and hold the leg strap on your left side. Raise the strap between your legs and connect it to the buckle on the left side. Attach the right leg strap using the same procedure.

Step 4.Pectoral straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if equipped). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6.Adjust the harness so it is tight. Adjust the shoulder straps until they are tight with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length and the chest strap should be centered on the bottom of the chest, about 15cm below the shoulder. The chest D-ring on the vest harness moves up or down by adjusting the shoulder and leg straps. Center the dorsal D-ring between the shoulder blades. Note: On applicable models the dorsal D-ring can be raised or lowered on the harness webbing as necessary to achieve a correct fit. Re-adjust the leg straps so they are tight. At least 8cm of webbing should remain beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

It's ready!A properly positioned and adjusted full body harness will effectively distribute impact forces throughout your body and provide proper support during suspension and rescue after a fall.

NORMATIVE

EN 358: 2001 - Personal protective equipment for restraint in the work position and prevention of falls from height.

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses

EN 1497: 2008 - Personal protective equipment against falls. Rescue harnesses

EN 365: 2005 - Personal protective equipment against falls from height. General requirements for instructions for use, maintenance, periodic inspection, repair, marking and packaging.

RECOMMENDATIONS FOR THE SET OF PPE

Do not use this safety equipment unless you have received training from a competent person (this training may be repeated as often as necessary). Contact CAPITAL SAFETY for information on classes or if you have questions regarding the use of this equipment. Training must be completed without exposing the user to a fall hazard and must be repeated periodically. (See the complete guide in the instructions for use)

ABOUT 3M

3M Fall Protection, part of the Personal Protection Products division of 3M, has earned a reputation as experts in safe working at height with our market innovations and high-performance fall protection and rescue solutionsThe ultimate protection against falls. For more than 75 years, workers at height around the world have relied on DBI-SALA® products to get the job done right and get home safe. Nowadays, 3M Fall Protection continues that proud tradition, offering high-quality DBI-SALA® fall protection solutions that enable workers to better do their jobs safely and comfortably.