Quick connect yellow harness for construction and transport (small) 3M DBI-SALA Delta Series

The 3M DBI-SALA Delta quick-connect harness is one of our most popular harnesses; it fits ergonomically and includes lightweight buckles and high-strength straps. It features a triangular anti-tangle pattern, allowing for easy donning of the harness. The anti-tangle design helps to adjust the harness perfectly. Available in: size S

It has water-repellent straps to keep you dry and comfortable. The anti-tangle design helps to adjust the harness perfectly. Abrasion-resistant straps for lasting durability. The Revolver adjuster provides a quick and easy vertical adjustment on the torso.

Confirm in advance with Sekureco.eu approximate delivery date.

FEATURES

• Work at height safely with the 3M DBI-SALA Delta quick-connect harness. The straps of this safety harness repel water to keep you dry, preventing the buildup of mold and dirt.
• These abrasion-resistant straps have lasting durability and respond to the most demanding daily conditions.
• The Revolver vertical adjusters provide a simple and quick adjustment on the torso straps, eliminating loose ends and preventing them from loosening.
• Its anti-tangle design helps to adjust the harness perfectly and allows for daily use with great comfort.
• Impact indicators make it easy to check for damage to the harness and help ensure its safe use.
• Covered identification labels help protect important information during the harness's lifespan.

BENEFITS

• Water-repellent straps to keep you dry and comfortable.
• The anti-tangle design helps to adjust the harness perfectly.
• Abrasion-resistant straps for lasting durability.
• The Revolver adjuster provides a quick and easy vertical adjustment on the torso.
• Vertical D-ring on the back.
• Covered identification labels.
• Impact indicators make it easy to check for damage to the harness and help ensure its safe use.

RECOMMENDED APPLICATIONS

Helps to work at height safely.

TECHNICAL DATA

Enhanced straps: Abrasion-resistant and water-repellent to reduce mold and dirt buildup.

Hook sling accommodations: Avoid having to carry the sling in hand when not in use.

Comfort pads: On the underside of the shoulder, hip, and leg straps. TM® 3M DBI-SALA harness

Quick-connect buckles: Lightweight buckles made of aluminum alloy for quick and easy connections. (There are also models with pass-through buckles).

Vertical D-ring on the back: The vertical D-ring on the back ensures quick, easy, and secure connections to your fall arrest system. Rigid belt: Allows carrying 27 kg of tools without breaking. Protected labels: Harness labels protected with hook and loop closure.

USAGE INSTRUCTIONS - ADJUSTING THE FALL ARREST HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, objects in your pockets can become trapped between the harness straps and the user's body causing injuries. Always refer to the usage instructions provided with the specific harness regarding proper installation and adjustment.

Step 1. Start. Hold the harness by the D-ring on the back, which is often attached through a D-pad, and ensure that the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it on your shoulders. Ensure that no strap is tangled and that they hang freely.

Step 3. Leg straps. Place it between your legs and secure the leg strap on your left side. Raise the strap between your legs and connect it with the left-side buckle. Connect the right leg strap using the same procedure.

Step 4. Chest straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if equipped). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6. Adjust the harness to be tight. Adjust the shoulder straps until they are tight with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length, and the chest strap should be centered on the lower chest, about 15 cm below the shoulder. The D-ring on the chest of the vest-type harness moves up or down by adjusting the shoulder and leg straps. Center the D-ring on the back between the shoulder blades. Note: In applicable models, the D-ring on the back can be raised or lowered on the harness strap as needed to achieve a proper fit. Readjust the leg straps to be tight. There should be at least 8 cm of strap beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

You are ready! A properly placed and adjusted full-body harness will effectively distribute impact forces throughout the body and provide the proper support during suspension and rescue after a fall.

REGULATIONS

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses

EN 365: 2005 - Personal protective equipment against falls from height. General requirements for instructions for use, maintenance, periodic inspection, repair, marking, and packaging.