Microfiber safety shoe resistant to welding splashes EN 20345 S3+SRC+CI FAL MARTE

Safety shoe made of microfiber resistant to weld spatter. It has a non-metallic Vincap tip. Textile anti-puncture mould. Bi-density polyurethane sole with sliding level SRC.

CHARACTERISTICS

• Description: Microfiber shoe resistant to splashing by welding. This is a non-metallic Vincap. Textile anti-puncture mould. Bi-density polyurethane sole with sliding level SRC.
• Cut: Microfiber resistant to splashes from welding.
• Lining: Synthetic fabric: high breathability and abrasion resistance. Padded.
• Removable template: anatomically preformed. With antibacterial treatment. It allows washing at 30° and is abrasion resistant.
• Soles: Double density polyurethane with anti-slip reliefs.
• Protective pointer: Composite (Light, non-magnetic, thermal insulating, recovers its shape after the impact established in the regulations).
• Protective mould: Non-metallic anti-piercing mould (high strength polyester).
• Locking system: laces.

SPECIFICATIONS

• Shock-resistant pointer with an energy equivalent to 200 J and a compression of 15 KN.
• Absorption of energy in the heel up to 20 j.
• Insulation of the sole against cold
• It is usually resistant to hydrocarbons.
• Back closed.
• SRA. on tile (height ≥ 0.28, flatness ≥ 0.32). SRB on steel (heel ≥ 0.13, flat ≥ 0.18). SRC on tile and steel.
• Material and structure allowing the dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
• Resistance to water penetration and absorption in the cut.
• For use in the manufacture of motor vehicles 1.100N.
• Soldering shoes.

BENEFITS

• Manufacture from materials of any heading
• It's resistant to welding.
• Other, of circular cross-section

TECHNICAL DATA

• Reference number: 270003
• Size: 35 to 49 EU
• Height: 8 cm internally (± 5%) [Talla 42]
• For the purposes of this Regulation, the following definitions shall apply: [Talla 42]

STANDARDS AND REGULATIONS

• This Regulation shall be binding in its entirety and directly applicable in all Member States
• Footwear whose material and structure allow the dissipation of electrostatic charges. Resistance between 0,05 MΩ and 100 MΩ, measured according to or described in UNE-EN 61340-5-1.

ABOUT FAL

FAL Shoes of Safety seeks the "Total Quality" as a priority objective. Therefore, it has the European standards for professional footwear, certified by Inescop. It also provides lightness, comfort and comfort of your safety footwear as part of your spine.