Full grain leather and nappa boot with Gore Tex lining S3+SRC+HI+CI+WR+HRO EN 20345 Fal RANGE

Waterproof flower and moth skin. Gore-Tex coating. This is a non-metallic Vincap. Textile anti-puncture mould. Bi-density polyurethane sole with sliding level SRC.

WATERPROOF, BREATHABLE AND COMFORTABLE

The GORE-TEX footwear has been designed to keep the feet dry and protected through its durable waterproofness, high breathability and optimal climatic comfort. It is combined with other high-quality fabrics to create a specific and exclusive shoe.

All the components (skins, fabrics, insulation material, laces, foams and threads), as well as the complete construction of the shoe itself, are specific to each application, and are made in a personalized way for their final use.

CHARACTERISTICS

• Description: Waterproof flower and moth skin boots. Gore-Tex coating. This is a non-metallic Vincap. Textile anti-puncture mould. Bi-density polyurethane sole with sliding level SRC.
• Cut: Flower skin waterproofed.
• Neck lining: Coolmax fabric: breathable and resistant to abrasion. Padded.
• Inner lining: Gore-Tex membrane, waterproof and breathable. High abrasion resistance.
• Removable template: Anatomically preformed with antibacterial treatment. It allows washing at 30° and is abrasion resistant.
• Soles: Double density polyurethane with anti-slip reliefs.
• Protective pointer: Composite (Light, non-magnetic, thermal insulating, recovers its shape after the impact established in the regulations).
• Protective mould: Non-metallic anti-piercing mould (high strength polyester).
• Locking system: watertight cords.

SPECIFICATIONS

• Shock-resistant pointer with an energy equivalent to 200 J and a compression of 15 KN.
• Absorption of energy in the heel up to 20 j.
• Insulation of the sole against cold
• It is usually resistant to hydrocarbons.
• Back closed.
• SRA. on tile (height ≥ 0.28, flatness ≥ 0.32). SRB on steel (heel ≥ 0.13, flat ≥ 0.18). SRC on tile and steel.
• Material and structure allowing the dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
• Resistance to water penetration and absorption in the cut.
• For use in the manufacture of motor vehicles 1.100N.
• Water resistance of the complete shoe.

OTHER

35-48

BENEFITS

• Cut: Flower skin waterproofed.
• Neck lining: Coolmax fabric: breathable and resistant to abrasion. Padded.
• Inner lining: Gore-Tex membrane, waterproof and breathable. High abrasion resistance.
• Removable template: Anatomically preformed with antibacterial treatment. It allows washing at 30° and is abrasion resistant.
• Soles: Double density polyurethane with anti-slip reliefs.
• Protective pointer: Composite (Light, non-magnetic, thermal insulating, recovers its shape after the impact established in the regulations).
• Protective mould: Non-metallic anti-piercing mould (high strength polyester).
• Locking system: watertight cords.

TECHNICAL DATA

• Reference number: 248441
• Size: 35 to 48 EU
• Height: 14 cm internally (± 5%) [Talla 42]
• Weight: 1,70 kg/pair (approximately) [Talla 42]
• Gore-Tex

STANDARDS AND REGULATIONS

• This Regulation shall be binding in its entirety and directly applicable in all Member States
  S3+SRC+HI+CI+WR+HRO
  IN13832-2:2018 TYPE US/[O-R]
  200 Y-A-E-PY-CI-WV
• Footwear whose material and structure allow the dissipation of electrostatic charges. Resistance between 0,05 MΩ and 100 MΩ, measured according to or described in UNE-EN 61340-5-1.
• Chemically resistant according to EN13832-2:2018
  K: SODIUM HYDROXIDE (40%) - CAUSTIC SODA
  OR: AMMONIUM HYDROXIDE (25%) - AMMONIA
  R: SODIUM HYPOCHLORITE (13%) – BLEACH

WHAT KIND OF WORK IS APPROPRIATE

Professional and industrial use

ABOUT FAL

FAL Shoes of Safety seeks the "Total Quality" as a priority objective. Therefore, it has the European standards for professional footwear, certified by Inescop. It also provides lightness, comfort and comfort of your safety footwear as part of your spine.