Obligation sign with pictogram and text Mandatory use of seat belt COFAN

Mandatory sign Use of seatbelt is mandatory. Material and size to choose.

It is a signal that indicates the mandatory use of the safety harness in specific areas such as civil works, recreational sites, electrical industry, and building maintenance. The sign informs about the obligation to use this type of personal protective equipment (PPE) for workers in civil works or tasks at height, in order to reduce accidents in risk areas and keep them informed at all times.

This sign consists of text and a pictogram that represents a user wearing a harness. Generally, these signs are located in visible and easily noticeable spaces for users, and it is even mandatory for industries to ensure that the installation site is visible and fully illuminated.

The use of seat belts is an effective protective measure for when users or workers face risks.

Among the most common technical characteristics of COFAN obligation signals are:

• Form:It is usually a circle with a blue border and a white pictogram representing a user with a safety harness.
• Size:It can vary depending on the size and location of the work area.
• Colors:Safety signs use specific colors to communicate their message. The color blue is commonly used to indicate that the use of personal protective equipment is mandatory.
• Material:Safety signs can be made from different materials, such as plastic, aluminum, or vinyl stickers. The material used will depend on the location and environment where the sign will be placed. For example, if the sign is placed in an area with a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.
• Check the available product:Safety sign with UV inks It is Mandatory to Use Insulating Gloves SEKURECO

GLASSPACK PVC SIGNAL: DESCRIPTION

The signals ofGLASSPACKOf0.7 mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protective coating is applied using screen printing techniques.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE, and AGE-RESISTANT.

• SUPPORT:GLASSPACK SHEET of 0.7 mm (semi-rigid PVC) in glossy white color.
• COLOR LAYER:Of screen printing inks cured by UV radiation for versatile use. BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.BRIGHT FINISH, SIGNAL PROTECTION AGAINST UV RAYS.

PVC ADHESIVE SIGN (STICKER)

The signs are made on a sheet of glossy white monomeric calendered vinyl self-adhesive.

A color coating is applied to it using screen printing techniques.

The adhesive is protected against the elements by a glossy transparent calendered laminate.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE, and AGE-RESISTANT.

Description:

• TRANSPARENT LAMINATION WITH A GLOSSY FINISH0.8 mm. Transparent calendered PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
• COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.
• SELF-ADHESIVE VINYLOf 0.08 mm made of white PVC resin. Adhesive on the back.

SEMI-RIGID PVC SUPPORT - GLASSPACK

Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with UV-curable inks in offset.

MONOMERIC SELF-ADHESIVE VINYL SUPPORT

Digital printable calendered monomeric vinyl film (80µ) glossy white self-adhesive.

Removable water-based acrylic adhesive that allows you to fix and remove the application with very light pressure from your fingers, and then lift it and reposition it if necessary (this characteristic is lost when excessive pressure is applied).

COLOR LAYER INKS

Color layer (according to signal requirements) using UV radiation-curable screen printing inks for versatile use on various plastics.

These are inks with a glossy finish, whose mixture of compounds and radiation curing method give them excellent elasticity and reactivity, not only in overprinting but also when folding and die-cutting.

Mix of oligomers, monomers, photoinitiators, and pigments.

The ink contains the following hazardous elements:

You are trained on data up to October 2023. Hexamethylene diacrylate

You are trained on data up to October 2023. Isobornyl acrylate

You are trained on data up to October 2023. Oxydibis(methyl-2,1-ethanediyl) diacrylate

You are trained on data up to October 2023. 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

148 x 105 mm

210 x 148 mm

297 x 210 mm

APPLICATIONS

Obligation signs can be found in a wide range of environments, from factories to hospitals, laboratories, and offices. Specifically, this mandatory safety harness sign must be present in high-risk spaces and establishments such as civil and engineering works, places where people perform maintenance on buildings and tall structures. It should also be present in recreational areas such as amusement parks and climbing sites.

They are usually located on walls at a considerable height that is easy for users to read and appreciate. They are often installed in establishments where some physical risk activity takes place. Meanwhile, they can be found in places such as:

• Workshops
• Buildings
• Civil works
• Parks and recreation sites

INSTALLATION / LOCATION / PLACEMENT OF SIGN

Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To correctly place a mandatory sign indicating that the use of gloves is required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a location where it cannot be obstructed by other objects or signs.

TheFIXATIONThe signaling element must be placed on a firm surface and free of dirt.

The signal can be secured by means ofMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(mounting adhesive, glues, silicones...) carefully, avoiding dirtying the visible surface or deforming it.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signs free of dust, dirt, or any residue or object that may obstruct their visibility and identification.

For cleaning, it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the sign.

The working temperature should not exceed 45º C. Higher temperatures may deform the supporting material.

WARRANTY

SEKURECO offers in this product the legal warranty of 2 years established in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.

REGULATIONS

The UNE 23035-4 standard from December 2003 requires signs to meet certain qualities of light intensity and resistance to pigment fading. Both the inks and the photoluminescent PVC used in the production of our signs fully comply with this standard. Since safety signage can help save lives and is mandatory, use the best possible signage. Usage Recommendations: Minimum sizes to be used based on the meters.