€11.98 (Sin IVA)
Windproof tubing with reflective bands 3M Of a fat content, by weight, exceeding 13%
Windproof tubing with reflective bands 3M It's called ScotchliteTM BUFF. Perfect for static tasks in cold, windy climates.
95% polyester, 3% elastane and 2% PTFE
28,88 € (No tax)
€28.88 (Sin IVA)
Windproof Tubular with Reflective Strips 3M ScotchliteTM BUFF. Tubular designed to offer protection in cool outdoor environments and situations with strong or moderate wind incidence, since it incorporates a Gore® Windstopper windstopper membrane that blocks the passage of wind, in addition to repelling water, preventing it from coming into contact with the skin. and increase the worker's feeling of cold. The fabric of this windproof neck gaiter is made from recycled polyester. It is very soft and pleasant to the touch, as well as elastic, which increases the worker's feeling of comfort. In addition, it is breathable and shows good moisture management that prevents sweat from concentrating and therefore causing it to cool down.
COMPOSITION
95% Polyester, 3% Elastane, 2% PTFECHARACTERISTICS
- Innovative windproof technology developed by GORE® to offer total protection against the wind.
- It reduces the effects of cold and is breathable to avoid the risk of overheating.
- UltraStretch technology: maximum elasticity for greater performance and comfort.
- Certified UPF50 sun protection. Maximum protection for outdoor activity in sunny weather.
- Enjoy the versatility and possibilities of our most multifunctional products.
- Choose from multiple ways to wear it and possibilities for protection and style.
- Retroreflective strips improve visibility in low light conditions.
- Stretch fabric that expands in all directions for greater comfort and freedom of movement.
- Fabric made from post-consumer plastic bottles. The bottles are recovered after use, cleaned and crushed, obtaining small shavings that are reprocessed into fibers that are then spun to produce technical fabrics.
- Resistant to humidity and water penetration.
- Fabric with Gore Tex® technology designed to block the passage of wind, maintaining breathability and comfort.
- Versatile product with multiple uses that can be worn in a large number of different ways.
TECHNICAL DATA
Weight (grams): |
100 |
Color: |
Black |
Measurements (Width x Length): |
28.5X61.7 |
Composition: |
96% Polyester 4% PTFE |
Recommended age: |
Adult |
Gender: |
Female Male |
Washing tips: |
Machine wash |
Weight (grams): |
100 |
CERTIFICATIONS
Protection against the cold in cool environments Accessory designed and indicated for the protection of the user against minimal risks derived from the cold in cool environments, characterized by the possible combination of humidity and wind at a temperature equal to or greater than 5o C and up to 10o C. The Gore Tex® fabric has a higher protection capacity than the other fabrics in the garment. This increased capacity is indicated by the “+” symbol on the icon.
Testing standards and performance values in the fabric: |
|||
Properties |
Rule |
Gore-tex® fabric |
Rest of fabrics |
Thermal resistance (insulation) (Rct) |
EN ISO 11092:2014 |
Results between 0.04 - 0.05 m2K/W |
Results between 0.01 - 0.02 m2K/W |
Air permeability (AP) |
EN ISO 9237:1995 |
Class 3* |
Class 1* |
Class |
Air permeability (mm/s) |
1 |
AP > 100 |
2 |
5 < AP ≤ 100 |
3 |
AP ≤ 5 |
PROTECTIVE PROPERTIES AGAINST MINIMAL RISKS DUE TO LOW VISIBILITY. This garment does not protect against this risk on its own, as it does not reach a minimum surface area for the user to be seen, but it contributes to an increase in visibility as long as the user also wears appropriate protective clothing against this risk.
TESTS ON FABRIC
Lamellar dough: EN 12127:1997 277 g/m2 ± 5%
Air permeabilityEN ISO 9237:1995 3.8mm/s ±10%
Thermal resistance (RCT):EN ISO 11092:2014 0.0429 m2K/W ± 10%
Resistance to water vapor (RET): EN ISO 11092:2014 5.9 m2Pa/W ± 10%
Determination of breaking force and elongation
EN ISO 13934-1:2013
AVERAGE MAXIMUM STRENGTH |
AVERAGE ELONGATION |
||
LONGITUDINAL |
610N ± 10% |
LONGITUDINAL |
92% ± 10% |
CROSS |
280N ± 10% |
CROSS |
128% ± 10% |
Burst resistance (5 washes): EN ISO 13938-1:1999 392 kPa ± 10%
Determination of dimensional variations of fabrics
EN ISO 5077:2008 LONGITUDINAL< ±3%CROSS< ±3%
4N washing program (Ta=40 ±3oC) according to ISO 6330:2012
Pilling resistance
ISO 12945-2:2001 5 2000 CYCLES
Scale from 1 to 5. 1 is “Very severe pilling” and 5 is “No pilling formation”
Abrasion resistance:>40000 CYCLES
EN ISO 12947-2:2016Test pressure: 9kPa Until a thread breaks
Solidity ranges:
Fastness of dyes to washing 4-5*
EN ISO 105-C06:2010
Color fastness to perspiration (Acid & Alkaline): EN ISO 105-E04:2013
ALKALINE |
4-5 * |
ACID |
4-5 * |
Fastness of dyes to rubbing (Dry and Wet) EN ISO 105-X12:2016
DRY |
4-5 * |
WET |
4-5 * |
Fastness of dyes to seawater: 4 – 5 *
EN ISO 105-E02:2013
Fastness of dyes to light 4 **
EN ISO 105-B02:2014 Method 2
* Solidity range between values 1 and 5, in which 1 is "VERY POOR" and 5 is "EXCELLENT" ** Solidity range between values 1 and 8, in which 1 is "VERY POOR" and 8 is "EXCELLENT"
ABOUT BUFF
heading
Ficha Técnica Ficha Técnica Tubular Windproof "A prueba de viento" download
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@