Energy-absorbing anchor element for scaffolding, 50mm hook.

• Energy absorber with safety rope for work on scaffolding ABM SCF with a diameter of 10.5 mm and eyelets at its ends.
• Approved for use in explosion risk areas
• Material:

Safety rope - Polyester
Energy absorber - Nylon

• Maximum elongation of energy absorber: 0.7 m
• AZ022 (galvanized steel hook, opening of 50 mm)
• AZ011 (galvanized steel carabiner, opening of 18 mm)

------------------------------------------------------------------------

In a large number of work environments, workers are exposed to the significant risk of falling from different heights, a danger present in both work at height carried out at heights greater than two meters and in those performed in confined spaces or in wells, excavations, trenches... Workers must use appropriate Personal Protective Equipment (PPE) to perform their jobs with the maximum possible safety, although other fall protection elements such as the Anchor element with energy absorber for scaffolding, 50mm hook. are also needed.

The Anchor element with energy absorber for scaffolding, 50mm hook is a component that consists of an absorber with a safety rope for performing work on scaffolding ABM SCF with a diameter of 10.5 mm and eyelets at its ends. It is approved for use in explosion risk areas. The safety rope material is polyester and the energy absorber is made of nylon. The maximum elongation of the energy absorber is 0.7 m. The hook of the element, as well as the carabiner, is made of galvanized steel, with the former having an opening of 50 mm and the latter 18 mm.

The anchor elements are components of great importance within the work environment, allowing the worker to be properly protected against the possibility of falling from different heights, thus providing greater safety and support. This way, the chances of a fall occurring, which could have very negative consequences for the worker in the form of injuries or even a fatal outcome, are reduced.

The anchor elements are not designed by themselves to function as fall arrest devices unless the manufacturer indicates so and they have a compatible absorber. In this case, the set cannot exceed two meters. At Sekureco, you can find components like this Anchor element with energy absorber for scaffolding, 50mm hook that incorporates the system to safely stop the worker in case they might fall from height. These elements must be inspected and always be in perfect condition.