Industrial warning sign Open Trench COFAN
OPEN TRENCH DANGER Signs in 1.5mm polystyrene and Adhesives
1,31 € (No tax)
€1.31 (Sin IVA)
"Danger open trench" sign in 1.5mm polystyrene (plastic) and adhesive, both ranges available in various sizes. The poster consists of text and pictogram and is manufactured based on the standards of EN ISO 7010
Open ditches can be dangerous in several industries, especially in the construction, mining and utility industry, therefore, it is essential to install these types of signs in visible locations and avoid accidents
In construction, trenches are commonly opened to install underground pipes, cables, and other utilities, and can pose a hazard to workers if proper safety measures are not taken. In mining, trenches are used to extract minerals and can be dangerous due to the possibility of landslides or cave-ins. In the utility industry, trenches are opened to install water, gas, and sewer pipes, and can be dangerous due to the possibility of gas leaks or explosions
This sign is highly visible and is strategically placed in locations where a specific warning about the presence of the potential hazard is required
Among the most common technical characteristics of prohibition signs with COFAN UV inks are:
- Shape:It is usually a circle with a pictogram and text
- Size:May vary depending on the size and location of the work area.
- Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to warn about dangerous behavior
- Material:Safety signs can be made of different materials, such as plastic, aluminum, or vinyl sticker. The material used will depend on the location and environment in which the sign will be placed. For example, if the sign is placed in an area where there is a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.
GLASSPACK PVC SIGN: DESCRIPTION
The signs ofGLASSPACKOf0.7mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protection coating is applied using screen printing techniques.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
- MEDIUM:0.7 mm GLASSPACK SHEET (semi-rigid PVC) in glossy white color.
- COLOR LAYER:Of screen printing inks cured by means of UV radiation for multipurpose use. COLOR BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signalGLOSSY FINISH, SIGNAL PROTECTION AGAINST UV RAYS.
ADHESIVE PVC SIGN (STICKER)
Signs are manufactured on a sheet of self-adhesive gloss white monomeric calendered vinyl
The color coating is applied to it using silk-screen techniques.
The adhesive is protected against the elements by a transparent gloss calendered laminate.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
Description:
- TRANSPARENT LAMINATE GLOSSY FINISH0.8 mm. Transparent CALANDRED PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
- COLOR LAYEREPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
- SELF-ADHESIVE VINYL0,08 mm made of white PVC resin. Back side of the adhesive.
SEMI-RIGID PVC SUPPORT - GLASSPACK
Gloss-finished, high optical quality compressed PVC backing especially suitable for printing using screen printing techniques with UV curing inks in offset
TECHNICAL DATA |
||
PROPERTIESYES |
TEST METHOD |
TYPICAL VALUE |
Tolerance of the thickness |
|
> 300£ 400 µm ± 5% |
Density |
ASTM D-792 DIN 53479 |
1.33 ± 0.01 g/cm3 |
Spot of softening VICAT (1kg / in oil / as samples stacked) |
ISO 306-A50 |
83± 2 ° C |
Spot of softening VICAT (5kg / in oil / as samples stacked) |
ISO 306-A50 |
74 ± 2°C |
Strain to the traction |
ISO 527 -1/-2 |
45± 3N/mm2 |
Deformation to the traction |
ISO 527 -1/-2 |
5± 1% |
Spot of creep |
ISO 527 -1/-2 |
36 ± 3 N/mm2 |
Spot of breakage |
ISO 527 -1/-2 |
> 80% |
Proof of impact |
ISO 8256 |
> 500 kJ/m2 |
Deformation to the impact |
ISO 8256 |
11 ± 2 mm |
Absorption of water |
ASTM D-570 DIN 53495 |
0.004 ± 0.002 % |
SELF-ADHESIVE MONOMERIC VINYL SUPPORT
Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.
Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.
TECHNICAL DATA |
||
PROPERTIES |
TEST METHOD |
TYPICAL VALUE |
Material |
|
Vinyl calendered monomeric |
Finish |
|
White glow |
Thickness |
Micrometer Federal Bench |
80 µm |
Guy adhesive |
|
Acrylic base water |
Adherence |
Peelability FTM 1 (180º) |
5 N/25 mm 24 h 23°C/50%RH |
Method of application |
|
Dry |
Elongation |
FTM 14 |
The 0.5 mm |
Range of temperature of application |
|
-50°C to +90°C |
Guy of substrates |
|
Aluminum, Glass, PMMA, PC, ABS, Paint |
COLOR LAYER INKS
Color layer (according to the needs of the sign) using screen printing inks cured by means of UV radiation for multipurpose use on various plastics.
These are inks with a glossy finish, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.
Mixture of oligomers, monomers, photoinitiators and pigments.
The ink contains the following dangerous elements:
• Hexamethylene diacrilate
• Isobornyl acrylate
• Oxybis diacrilate (methyl-2,1-estanodiilo)
• 1-Vinilhexahidro-2H-Azepin-2 -ona
DIMENSIONS (MM)
148 x 105mm
210 x 148mm
297 x 210mm
APPLICATIONS
It is common to find this danger sign in a variety of industries, the most common being:
Construction Industry
Mining
Utility industry
INSTALLATION / LOCATION / SIGN PLACEMENT
Check our blog to know how to install a signal or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To correctly post a mandatory sign indicating that gloves are required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a place where it cannot be obstructed by other objects or signs.
TheFIXEDThe signaling element must be carried out on a firm and free surface.
The signal can be secured byMechanical elements(screws, rivets, etc...) orADHESIVES(Assembly adhesive, queues, silicones ...) carefully, avoiding dirty view or deformation of it.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signals free of dust, dirt or any debris or object that prevents their visibility and identification.
For cleaning, it is advisable to preferably use soapy solutions, avoiding the use of solvents or abrasive products that could damage the surface of the sign.
The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.
WARRANTY
Sekureco offers in this product the legal guarantee of 2 years collected in Law 23/2003, of July 10, on guarantees in the sale of consumer goods.
NORMATIVE
In ISO 7010 2012 - Graphic symbols and colors for safety signals for accident protection, fight against fire and emergency evacuations.
ABOUT COFAN
Cofan: It is a company that has more than 15 years of experience in the hardware sector, industrial supply, and in the manufacture of safety footwear and other body protection equipment.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@