Safety sign: Danger! Trolley passage (text and pictogram) COFAN

Safety sign Danger! Trolley passage (text and pictogram) COFAN. The sign consists of text and a pictogram related to the danger message.

This warning or danger sign indicates the spaces for the mandatory passage of carts in the industry in general, particularly installed in loading and transporting areas for goods. Meanwhile, the sign alerts people about the use of carts in specific work areas. Carts are a type of manual or motorized vehicle used to transport heavy loads.

Among the most common technical characteristics of prohibition signs with COFAN UV inks are:

• Form:It is usually a circle with a pictogram and text.
• Size:It can vary depending on the size and location of the work area.
• Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to alert about dangerous behaviors.
• Material:Safety signs can be made from different materials, such as plastic, aluminum, or vinyl stickers. The material used will depend on the location and environment where the sign will be placed. For example, if the sign is placed in an area with a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.

GLASSPACK PVC SIGNAL: DESCRIPTION

The signals ofGLASSPACKOf0.7 mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protective coating is applied using screen printing techniques.

Our products areNO TOXIC, NO RADIOACTIVE, NO COMBUSTIBLE, and RESISTANT TO AGING..

• SUPPORT:GLASSPACK SHEET of 0.7 mm (semi-rigid PVC) in glossy white color.
• COLOR LAYER:Of screen printing inks cured by UV radiation for versatile use. BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.BRIGHT FINISH, SIGNAL PROTECTION AGAINST UV RAYS.

PVC ADHESIVE SIGN (STICKER)

The signs are made on a sheet of glossy white monomeric calendered vinyl self-adhesive.

A color coating is applied to it using screen printing techniques.

The adhesive is protected against the elements by a glossy transparent calendered laminate.

Our products areNO TOXIC, NO RADIOACTIVE, NO COMBUSTIBLE, and RESISTANT TO AGING..

Description:

• TRANSPARENT LAMINATION WITH A GLOSSY FINISH0.8 mm. Transparent calendered PVC film with monomeric plasticizer, cadmium-free, with UV filter.
• COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.
• SELF-ADHESIVE VINYLOf 0.08 mm made of white PVC resin. Adhesive on the back.

SEMI-RIGID PVC SUPPORT - GLASSPACK

Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with UV-curable inks in offset.

MONOMERIC SELF-ADHESIVE VINYL SUPPORT

Digital printable calendered monomeric vinyl film (80µ) glossy white self-adhesive.

Removable water-based acrylic adhesive that allows you to fix and remove the application with very light pressure from your fingers, and then lift and reposition it if necessary (this characteristic is lost when excessive pressure is applied).

COLOR LAYER INKS

Color layer (according to signal needs) using UV-curable screen printing inks for versatile use on various plastics.

These are inks with a glossy finish, whose mixture of compounds and radiation curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.

Mix of oligomers, monomers, photoinitiators, and pigments.

The ink contains the following hazardous elements:

You are trained on data up to October 2023. Hexamethylene diacrylate

You are trained on data up to October 2023. Isobornyl acrylate

You are trained on data up to October 2023. Oxydibis(methyl-2,1-ethanediyl) diacrylate

You are trained on data up to October 2023. 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

148 x 105 mm

210 x 148 mm

297 x 210 mm

APPLICATIONS

It is common to find this danger sign in a variety of industries, with the most common being:

Construction industry

Manufacturing

Logistics and transportation, etc.

INSTALLATION / LOCATION / PLACEMENT OF SIGN

Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To correctly place a mandatory sign indicating that the use of gloves is required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a location where it cannot be obstructed by other objects or signs.

TheFIXATIONThe signaling element must be placed on a firm surface and free of dirt.

The signal can be secured by means ofMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(mounting adhesive, glues, silicones...) carefully, avoiding dirtying the visible surface or deforming it.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signs free of dust, dirt, or any residue or object that may obstruct their visibility and identification.

For cleaning, it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the sign.

The working temperature should not exceed 45º C. Higher temperatures may deform the supporting material.

WARRANTY

SEKURECO offers in this product the legal warranty of 2 years established in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.

REGULATIONS

EN ISO 7010 2012 - Graphical symbols and colors for safety signs for accident prevention, fire fighting, and emergency evacuations.