€0.78 (no TAX)
Attention! Batteries in poor condition, warning signal SEKURECO
Attention! Batteries in poor condition, warning sign SEKURECO, with UV inks
Standard EN ISO 7010
€0.78 (no TAX)
Signs of "Danger: Batteries in Poor Condition" are available in various sizes and materials. Poor condition batteries can be found in several industries, including the automotive industry, the renewable energy industry, the electronics industry, and the medical device industry. Therefore, it is essential to signal these hazardous areas.
This sign is highly visible and is strategically placed in areas where a specific warning about the presence of a barrier that poses a potential risk to people's safety is required. Recommended for industries such as automotive and energy.
Among the most common technical features of prohibition signs with SEKURECO UV inks are:
- Form:It is usually a circle with a pictogram and text.
- Size:It can vary depending on the size and location of the work area.
- Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to alert about dangerous behaviors.
- Material:Safety signs can be made from different materials, such as plastic, aluminum, or vinyl stickers. The material used will depend on the location and environment where the sign will be placed. For example, if the sign is placed in an area with a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.
GLASSPACK PVC SIGNAL: DESCRIPTION
The signals ofGLASSPACKOf0.7 mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protective coating is applied using screen printing techniques.
Our products areNO TOXIC, NO RADIOACTIVE, NO COMBUSTIBLE, and RESISTANT TO AGING.
- SUPPORT:GLASSPACK SHEET of 0.7 mm (semi-rigid PVC) in glossy white color.
- COLOR LAYER:Of screen printing inks cured by UV radiation for versatile use. BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.BRIGHT FINISH, SIGNAL PROTECTION AGAINST UV RAYS.
PVC ADHESIVE SIGN (STICKER)
The signs are made on a sheet of glossy white monomeric calendered vinyl self-adhesive.
A color coating is applied to it using screen printing techniques.
The adhesive is protected against the elements by a glossy transparent calendered laminate.
Our products areNO TOXIC, NO RADIOACTIVE, NO COMBUSTIBLE, and RESISTANT TO AGING.
Description:
- TRANSPARENT LAMINATION WITH A GLOSSY FINISH0.8 mm. Transparent calendered PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
- COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signal.
- SELF-ADHESIVE VINYLOf 0.08 mm made of white PVC resin. Adhesive on the back.
SEMI-RIGID PVC SUPPORT - GLASSPACK
Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with UV-curable inks in offset.
|
TECHNICAL DATA |
||
|
|
TEST METHOD |
TYPICAL VALUE |
|
Tolerance of the thickness |
|
You are trained on data up to October 2023. 300£ 400 µm (micrometer) You are trained on data up to October 2023. 5% |
|
Density |
ASTM D-792 DIN 53479 |
1.33 You are trained on data up to October 2023. 0.01 g/cm translates to "grams per centimeter" in English.3 |
|
Point of softening VICAT (1kg You are trained on data up to October 2023. in oil You are trained on data up to October 2023. as samples stacked) |
ISO 306-A50 |
83 ± 2 °C |
|
Point of softening VICAT (5kg You are trained on data up to October 2023. You are trained on data up to October 2023. oil / how samples stacked) |
ISO 306-A50 |
74 You are trained on data up to October 2023. 2 °C |
|
Tension a the traction |
ISO 527 -1/-2 |
45 ± 3 N/mm2 |
|
Deformation a the traction |
ISO 527 -1/-2 |
5 ± 1% |
|
Point of fluency |
ISO 527 -1/-2 |
36 ± 3 N/mm2 |
|
Point of breakage |
ISO 527 -1/-2 |
You are trained on data up to October 2023. 80% |
|
Test of impact |
ISO 8256 |
You are trained on data up to October 2023. 500 kJ/m2 |
|
Deformation to impact |
ISO 8256 |
11 You are trained on data up to October 2023. 2 mm |
|
Absorption of water |
ASTM D-570 DIN 53495 |
0.004 You are trained on data up to October 2023. 0.002 You are trained on data up to October 2023. |
MONOMERIC SELF-ADHESIVE VINYL SUPPORT
Digital printable calendered monomeric vinyl film (80µ) glossy white self-adhesive.
Water-based removable acrylic adhesive that allows you to fix and remove the application with very light finger pressure, and then lift it and reposition it if necessary (this characteristic is lost when excessive pressure is applied).
|
TECHNICAL DATA |
||
|
PROPERTIES |
TEST METHOD |
TYPICAL VALUE |
|
Material |
|
Vinyl calendering monomeric |
|
Finished |
|
White brightness |
|
Thickness |
Micrometer Federal Banco |
80 µm (micrometer) |
|
Type of adhesive |
|
Acrylic base water |
|
Adherence |
Peelability FTM 1 (180º) |
5 N/25 mm 24 It seems like your message is incomplete. Could you please provide the full text you would like to have translated? 23°C/50%RH |
|
Method of application |
|
In dry |
|
Elongation |
FTM 14 |
It seems like your message was cut off. Please provide the HTML content you would like to have translated from Spanish to English, and I'll be happy to assist you! 0.5 mm |
|
Range of temperature of application |
|
-50°C a +90°C |
|
Type of substrates |
|
Aluminum, Glass, PMMA, PC, ABS, Painting |
COLOR LAYER INKS
Color layer (according to signal requirements) using UV radiation curable screen printing inks for versatile use on various plastics.
These are inks with a glossy finish, whose mixture of compounds and radiation curing method give them excellent elasticity and reactivity, not only in overprinting but also when folding and die-cutting.
Mix of oligomers, monomers, photoinitiators, and pigments.
The ink contains the following hazardous elements:
You are trained on data up to October 2023. Hexamethylene diacrylate
You are trained on data up to October 2023. Isobornyl acrylate
You are trained on data up to October 2023. Oxydibis(methyl-2,1-ethanediyl) diacrylate
You are trained on data up to October 2023. 1-vinylhexahydro-2H-azepin-2-one
DIMENSIONS (MM)
PVC GLASSPACK 0.7 mm
300x400 mm
210x300 mm
VINYL ADHESIVES
200x300 mm
150x200 mm
100x150 mm
ALUMINUM 0.5 mm
300x400 mm
210x300 mm
* This measure is served with perforated corners.
APPLICATIONS
It is common to find this danger sign in a variety of industries, with the most common being:
Renewable energy industry
Electronic industry
Medical device industry
INSTALLATION / LOCATION / PLACEMENT OF SIGN
Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To properly place a mandatory sign indicating that the use of gloves is required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to position the sign at eye level and in a location where it cannot be obstructed by other objects or signs.
TheFIXATIONThe signaling element must be placed on a firm surface and free of dirt.
The signal can be secured by means ofMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(mounting adhesive, glues, silicones...) carefully, avoiding dirtying the visible surface or deforming it.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signs free of dust, dirt, or any residue or object that may obstruct their visibility and identification.
For cleaning, it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the sign.
The operating temperature should not exceed 45º C. Higher temperatures may deform the supporting material.
WARRANTY
SEKURECO offers in this product the legal warranty of 2 years established in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.
REGULATIONS
EN ISO 7010 2012 - Graphical symbols and colors for safety signs for accident prevention, fire fighting, and emergency evacuations.
ABOUT SEKURECO
Work safety experts! We are a young and newly established company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and occupational safety. Sekureco offers a selection of over 10,000 specialized products in occupational safety, available to companies and individuals, from the best brands and at the most competitive prices in the market.
SOBRE SEKURECO
Sekureco es una empresa que surge en 2016 gracias a la pasión de varios técnicos especializados en prevención y seguridad laboral y ante la falta de empresas realmente especializadas en protección laboral en el mercado.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@