WELDAS glove with aluminized back COMFOFLEX

Welder's glove with COMFOflex® lining and aluminized back to reflect radiant heat, made of split cowhide and deer leather.

FEATURES

• Split cowhide leather.
• Full hand with COMFOflex® lining and cuff with flame-retardant coating.
• Transparent cuff.
• The aluminized back of the hand is designed to reflect radiant heat and has a deer leather lining between the base and the COMFOflex® coating.

MATERIALS

Aluminized back with PFR fabric, with a layer of deer leather and interior lining of COMFOflex®. For the outer side of the palm, a thick layer of flexible and durable cowhide is used, coated with COMFOflex®. The cuff is coated with flame-retardant fiber, for added safety, sewn with 4-layer KEVLAR® thread for greater durability. All seams are bound.

APPLICATIONS

Gloves for welding work.

SIZES

L (9) 35 CM.

XL (9 1/2) 35 CM.

XXL (10 1/2) 46 CM.

PACKAGING AND STORAGE

1 pc (pair)

Store and dry at a temperature above 5º C. Do not stack more than 5 levels of boxes on a pallet.

USAGE INSTRUCTIONS

This glove is designed to be used as a MIG/MAG welding glove, as well as for electrode welding. Currently, there is no standardized testing method to detect penetration of U.V. rays into glove materials, but current protective glove construction methods for welders typically do not allow penetration of U.V. radiation.

With arc welding facilities, it is not possible to protect all parts that conduct welding voltage from direct contact for operational reasons. The lifespan depends on the degree of wear and the intensity of use in the respective areas of application. Therefore, providing temporal information is not possible. This glove should not be used when there is a risk of entanglement by moving parts of machines.

HEALTH INFORMATION

The pH, chromium VI, and PCP levels of all materials have been tested and comply with CE standards, with coloring based on natural materials.

STANDARDS/ REGULATIONS

Thermal risks: EN 12477 (2001+A1:2005) TYPE A - 41244 X

TÜV BP 60152705 0001

TÜV 60400780 002 Kat II

Mechanical risks: EN 388:2016 + A1 : 2018 - 2144 X

Electrical hazard: When gloves are intended for arc welding: these gloves do not provide protection against electric shocks caused by faulty equipment or live work, and electrical resistance is reduced if the gloves are wet, dirty, or soaked with sweat, which could increase the risk.