Green welding glove WELDAS with reinforced hand ThunderingBison

ThunderingBison welding glove with reinforced bison leather hand, cow suede cuff, and the interior back lined with COMFOflex®

FEATURES

• Bison leather hand.
• Cow leather cuff.
• Hand interior lined with COMFOflex®.
• Fireproof lined cuff.
• CHROMIUM <2 mg./Kg.

MATERIALS

The materials used in the hand are bison leather and the COMFOflex® lining on the internal back of the hand. The back is made of cow leather and the inner back is lined with cotton fabric. Sewn with KEVLAR® thread of 4 + 5 layers.

APPLICATIONS

Gloves for welding work.

SIZES

M (8 1/2).

L (9) 35 CM.

XL (9 1/2) 35 CM.

XXL (10 1/2) 46 CM.

PACKAGING AND STORAGE

1 PC (the pair)

Store and dry at a temperature above 5º C. Do not stack more than 5 levels of boxes on a pallet.

USAGE INSTRUCTIONS

This glove is designed to be used as a MIG / MAG welding glove, as well as for electrode welding. Currently, there is no standardized testing method to detect penetration of U.V. rays into glove materials, but current construction methods for protective gloves for welders typically do not allow penetration of U.V. radiation.

With arc welding facilities, it is not possible to protect all parts that conduct welding voltage against direct contact for operational reasons. The lifespan depends on the degree of wear and the intensity of use in the respective areas of application. Therefore, temporal information is not possible. This glove should not be used when there is a risk of entanglement by moving parts of machines.

HEALTH INFORMATION

The pH, chromium VI, and PCP levels of all materials have been checked and comply with CE standards, colored with natural materials.

STANDARDS/ REGULATIONS

Thermal risks: EN 12477 (2001+A1:2005) TYPE A - 413X4X

Mechanical risks: EN 388:2016 + A1 : 2018 - 3144X

TÜV BP 60152714 0001

TÜV 60403193 003 Kat II

Electrical hazard: When gloves are intended for arc welding: these gloves do not provide protection against electric shocks caused by defective equipment or live work, and electrical resistance is reduced if the gloves are wet, dirty, or soaked with sweat, which could increase the risk.