Bison leather gloves with suede leather cuff WELDAS TIG ThunderingBison

ThunderingBison welding glove made of bison leather with a cow suede cuff

FEATURES

• Hand made of bison leather.
• Cuff made of cow suede.
• Chromium level below 2 mg / kg
• Sewn with 4 + 5 layers of KEVLAR® thread

MATERIALS

The materials used in the hand are made of bison leather and the COMFOflex® lining on the inner back of the hand. The back is made of cow leather and the inner back is lined with cotton fabric. Sewn with 4 + 5 layers of KEVLAR® thread.

APPLICATIONS

Used for welding work.

SIZES

M (8 1/2)

L (9)

XL (9 1/2)

XXL (10 1/2)

PACKAGING AND STORAGE

1 (pair)

Store and dry at a temperature above 5º C. Do not stack more than 5 levels of boxes on a pallet.

USAGE INSTRUCTIONS

This glove is designed to be used as a MIG/MAG welding glove, as well as for electrode welding. Currently, there is no standardized testing method to detect penetration of U.V. rays into glove materials, but current construction methods for protective gloves for welders typically do not allow the penetration of U.V. radiation.

With arc welding facilities, it is not possible to protect all parts that conduct welding voltage from direct contact for operational reasons. The lifespan depends on the degree of wear and the intensity of use in the respective areas of application. Therefore, the temporal information is not possible. This glove should not be used when there is a risk of entanglement by moving parts of machines.

HEALTH INFORMATION

The pH, chromium VI, and PCP levels of all materials have been checked and comply with CE standards, colored with natural materials.

STANDARDS/ REGULATIONS

EN 12477 (09.2005) TYPE A/B

Thermal risks: EN 12477: 2001+A1: 2005 - 413X4 X

Mechanical risks: EN 388:2016 + A1: 2018 - 2133

TÜV BP 21146065 001

TÜV 556-10-0071/01