SAFETOP fall arrest kit with Teide harness and carabiners

Fall team composed of: Arnés Teide Ref. 80070B, with three attachment points: two pectoral attachment rings and one dorsal ring to place the connecting subset. 1 m polyester rope, manufactured with headgear at the ends to connect muskets. Includes two 80112 muskets, 25 Kn resistance and a carrying case Ref. 80124 of polyester.

CHARACTERISTICS OF THE SAFETY HARNESS

• Category III PPE
• A four-point anchorage harness: two front loops, two side positioning rings and a dorsal anchorage
• In yellow colour of easy visibility combined with black
• Includes belt for fixed positioning work at workstations, with personal fastening buckles
• Rings for possible connection of the damper
• Backs for the adjustment and placement of shoulder straps and thighs
• Closing and adjusting buckle for secondary breast bands
• Two side fastening or holding rings
• Subgluteal band joining the two thigh bands

Adjustable in legs

I DID

Tape frontal of attachmentpectoral

I DID

Loops tool holders

NO

Width of the tapesprimary

44 mm

Width of the tapessecondary

24 mm

The belt ofpositioning

I DID

Weight

1250 g

Packaging

1 you

CHARACTERISTICS OF ROPE WITH GUARDRAILS

• Category III PPE
• made from polyester braided yellow-black easily visible
• Mounting or fixing device in a working position
• Total length (from guard to guard): 1 m.
• The diameter is 12 mm.
• Extremes manufactured with thermoset and reinforced inside links for connecting muskets.
• Musketeers must be certified according to EN362.
• The safety harness can be used as in connection with an energy absorber as a safety harness according to standard EN354.

CHARACTERISTICS: STEEL MUSKETS

• Category III PPE
• made of steel with a screw-through manual locking mechanism. 19 mm of aperture
• Maximum resistance: 25 Kn (longitudinal, when the door is closed and locked)
• Size: 108 x 60 mm
• Weight: 170 g approx type B
• Connector used as component

Revisions and lifetime

Reviews: The equipment must be reviewed every 12 months by an authorised person or by the manufacturer. Inspections shall be recorded on the review sheet attached to the PPE together with the instruction manual.

See instruction manual to identify the maximum lifetime of the equipment.

Cleaning: clean with soap and water not above 30oC. Don't dry in the heat. Lubricate the visages and opening handles occasionally after washing.

CHARACTERISTICS OF THE BAG

• Polyester bag, designed to hold fall-proof equipment.
• In black
• High strength fabric
• Waterproof
• Measures 37x32 cm.

APPLICATIONS

Suspension on the surface, installation of collective shields, fixation to horizontal lifelines, among others.

STANDARDS AND REGULATIONS

For the purposes of this Regulation, the following definitions shall apply:

EN354 (mooring equipment)

For the purposes of this Regulation, the following definitions shall apply:

ABOUT SAFETOP

It is an innovative company specialising in personal protective equipment with international commercial activity. Their approach is to distinguish themselves and offer an added value that leaves its mark on the products and services they offer, innovating and developing solutions to the new challenges posed by achieving a working environment with a level of protection, comfort and personal safety that meets today's social requirements.