FFP1 9310+GEN3 particulate mask without valve (20 units) 3M

FFP1 9310+GEN3 particulate mask without valve (20 units) 3M. They meet the requirements of the European standard EN 149:2001 + A1:2009 for self-filtering masks against particles. They offer effective respiratory tract protection in those sectors where workers are exposed to solid particles or non-volatile liquid particles.

The respirator for manual sanding 3M Aura 9310+ is our filtering facepiece respirator with Aura 3-panel design, adjustable nose clip, sculpted nose panel, and color-coded headbands for comfortable wear. Rated FFP1, it is available in packs of 20.

Maximum penetration through filter: 20%

Confirm in advance with Sekureco.eu delivery date approx.

CHARACTERISTICS

• With our 3-panel Aura design, it is designed to allow greater facial movement while speaking and the high-performance filter material is designed to facilitate breathing.
• Greater facial mobility with the Aura 3-panel design
• Improved breathability through high-performance filter material that allows you to breathe easily.
• Headbands keep the mask in place and are color coded to indicate performance level - yellow: FFP1 according to EN 149:2001+A1:2014
• Complies with European standards: CE mark 0086 (EN 149:2001 + A1:2009 FFP1 NR D)
• This product helps protect against certain particles at concentrations up to 10 times the occupational exposure limit

BENEFITS

• The adjustable nose clip, low-profile curved design and sculpted nose panel help ensure a better seal and precise fit, but also a good field of vision and better compatibility with glasses 3M.
• The raised top panel is designed to further minimize glasses fogging and achieve greater sharpness.
• Adjustable nose clip allows for a better seal with a precise fit
• Without latex components of natural origin
• Compatible with eye and hearing protection 3M

MATERIALS

INSTRUCTIONS FOR USE

See figure 1.

Before adjusting the device, make sure your hands are clean. Before each use, all components of the mask should be inspected for damage.

1. With the back side facing up and using the tabs, separate the top and bottom panels.

2. Pull the tabs on the chin and nose panels until the nose clip bends so that the mask forms a cup shape. Make sure both panels are fully deployed.

3. Without releasing the lashes, hold the mask with the open side facing your face and place it on your face.

4a. MASK WITH VALVE: With one hand, hold the sides of the valve to maintain the position of the mask on the face. 4b. Mask WITHOUT VALVE: Hold the mask in one hand with the open side facing your face.

5. With your other hand, take each of the straps and adjust them to your head.

6. Place the top strap on the crown of your head and the bottom strap on the back of your neck and below your ears. The strips should not be twisted. Adjust the top and bottom panels, using the tabs, until comfortable. Make sure the panels are unfolded and the tabs are folded.

7. Using both hands, mold the nose clip to the shape of your nose to ensure a precise fit and proper seal. Pressing the nose clip with only one hand may reduce the effectiveness of the mask.

8. Before entering the workplace, you must check that the mask is properly sealed to your face.

APPLICATIONS

Use the respirator for manual sanding 3M Aura 9312+ as respiratory protection in hand sanding tasks. Our respirator helps provide FFP1 protection against low levels of dust and non-hazardous oil- or water-based mists.

The FFP1 (Class 1 Filtering Facepiece) protects against low levels of non-hazardous dusts and oil- or water-based mists, which are commonly produced during manual sanding and basic DIY activities

The user must be trained in the correct use of the equipment and read and understand the instructions for use. Misuse can cause serious or life-threatening injuries or illnesses

NORMATIVE

Products are classified by their filtering efficiency and maximum total inward leakage performance (FFP1, FFP2 and FFP3), as well as by their usefulness and resistance to clogging. Performance tests of this standard include penetration through the filter; practical behavior test; that of flammability; that of resistance to breathing and that of total leakage towards the interior.

Reusable products also undergo cleaning and storage tests, and mandatory clogging resistance tests (the latter are optional for non-reusable products). You can purchase a complete copy of EN 149:2001+A1:2009 from your national standards body.

APPLICATIONS

Use the respirator for manual sanding 3M Aura 9310+ as respiratory protection in hand sanding tasks. Our respirator helps provide FFP1 protection against low levels of dust and non-hazardous oil- or water-based mists.

The FFP1 (Class 1 Filtering Facepiece) protects against low levels of non-hazardous dusts and oil- or water-based mists, which are commonly produced during manual sanding and basic DIY activities

The user must be trained in the correct use of the equipment and read and understand the instructions for use. Misuse can cause serious or life-threatening injuries or illnesses

BREATHING RESISTANCE

The breathing resistance of the mask is tested during inhalation and exhalation. The breathing resistance of masks must not exceed the following limits:

VIDEOS

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.