Informative signal Machine room pictogram and text Cofan

Informative signal in Text Glasspack and pictogram. Machine room. The poster is available in two variations of size 175x45 and 250x62 mm to adapt to the needs of your industry

The poster points out the location of a room intended for control and management of machinery or equipment. It is used to provide information and guidance to people who are in a given place.

Among the most common technical characteristics of the Cofan signals are:

• Form: it is usually a circle, square rectangle, with text accompanied by pictogram
• Size:It may vary depending on the size and location of the work area.
• Color:Safety signals use specific colors to communicate your message. The blue color is commonly used to indicate that the use of personal protective equipment is mandatory.
• Material:Safety signals may be made of different materials, such as plastic, aluminum or sticker vinyl. The material used will depend on the location and the environment in which the signal will be placed. For example, if the signal is placed in an area where there is a lot of dust or humidity, it is advisable to use a material resistant to these conditions.

Glasspack PVC signal: Description

The signs ofGLASSPACKOf0.7 mm they consist of a semi-rigid polymeric base (PVC) with bright white finish on which the color coating and protection is applied by serigraphic techniques.

Our products areNon-toxic, non-radioactive, non-combustible and aging resistant.

• Support:Glasspack iron of 0.7 mm (semi-rigid PVC) bright white.
• Color layer:Of indigenous sneakers of curing by means of UV radiation of polyvalent use. Black, green, red, blue, yellow, orange depending on the type of signBright finish, protection of the signal against UV rays.

Adhesive PVC signal (sticker)

The signs are made of a white monomeric monomeric vinyl sheet. Self-adhesive brightness

About it is applied by serigor techniques the color coating.

The adhesive is protected against inclemencies by a transparent brilliance laminate.

Our products areNon-toxic, non-radioactive, non-combustible and aging resistant.

Description:

• Transparent laminate glossy finishOf 0.8 mm. Transparent film of calendered PVC with monomyric plasticizer, free of cadmium, with UV filter.
• Colored layerEpoxy resins of black, green, red, blue, yellow, orange depending on the type of sign.
• Self-adhesive vinyl0.08 mm made of white PVC resin. Adhesive back face.

Housing PVC support - GlassPack

PVC support Tablet gloss, high quality optical specially suitable for printing by serigor techniques with UV curing inks in offset.

Self-adhesive monomeric vinyl bracket

Monomeric Colding Digital Printable Molten Printable Lamina (80μ) White Color Self-adhesive brightness.

Acrylic adhesive on the basis of removable water, which allows to fix and remove the application under a very slight pressure with the fingers, to subsequently lift it and reposition it if necessary (characteristic is lost when exercising excessive pressure).

Color layer inks

Color layer (according to signal needs) by curing serigraphic inks by means of multi-purpose UV radiation on various plastics.

These are inks with glossy finish, whose mixture of compounds and radiated healing method give you excellent elasticity and reactivity, not only in overprint if not also before bending and die-cutting.

Mix of oligomers, monomers, photoinitiators and pigments.

The ink contains the following hazardous elements:

• Hexamethylene Diacrylate

• Isobornilo acrylate

• Oxibis diacrylate (methyl-2,1-ethanodiyl)

• 1-vinilhexahidro-2h-azepin-2-ONA

APPLICATIONS

• Factories
• Facilities with machinery
• Industries
• Heavy machinery

Installation / Location / Signal placement

Check our blog to know how to install a signal or poster: https://www.sekureco.eu/gb/blog/76_.html

To correctly place an obligation signal that indicates that the use of gloves is mandatory, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the signal at eye height and in a place where it can not be obstructed by other objects or signals.

TheFixingFrom the signaling element, it must be done on a firm and free surface dirt.

The signal can be ensured byMechanical elements(screw, rivets, etc ...) oADHESIVES(Assembly adhesive, tails, silicones ...) carefully, avoiding dirtying the surface view or deformation thereof.

Maintenance and recommendations

In order to preserve the functionality for which signaling systems have been conceived, Sekureco recommends maintaining free dust, dirt or any remaining or object signals that avoid visibility and identification of them.

For cleaning, it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may deteriorate the surface of the signal.

The working temperature should not be greater than 45º C. Higher temperatures may deform the support material.

Warranty

Sekureco offers in this product the legal guarantee of 2 years collected in Law 23/2003, of July 10, of guarantees in the sale of consumer goods.

On Cofan

Cofan: It is a company that has more than 15 years of experience in the hardware store, industrial supply, and in the manufacture of safety footwear and other body protection equipment.