Informative sign Computer Stainless Steel Adhesive 0.8mm 50 x 200 mm SEKURECO

Informative signage for IT Stainless steel 0.8 mm 50x200mm SEKURECO, the sign is rectangular and comes in adhesive format. It consists of proportional text in black and a pictogram in white.

It is used to provide information and guidance to people in a specific location.

The IT signage is often installed on access doors to IT rooms in companies, schools, and universities.

FEATURES

Denomination (according to ISO Standard 7010/2012)

Materials: stainless steel support

According to UNE 53127:

Stainless steel 0.8 mm thick.

Stability with T° < 55°.

Negligible water absorption (0.04 ‡ 0.01)%.

Self-extinguishing.

No significant lead and phosphorus content (less than 0.01%)

Non-toxic.

OUTER PROTECTIONS:

Protection against UV rays (does not blacken in the sun).

COLOR:

High adhesion and resistance ink.

Allows for great flexibility in the final product.

Not self-flammable. Non-toxic.

FINAL THICKNESS:

0.8 mm (=10%).

PRODUCT REFERENCE: RD707000 A RD797027

INFORMATIVE SIGN

DIMENSIONS:

FORMAT

Pictogram Image

Rectangular.

MEASUREMENTS: 5x20 cm.

OBSERVATION DISTANCE:

Sign area m2: 0.01 102/2000=0.05 m2

To calculate the necessary dimensions of a sign, up to a maximum distance of 50 m2, the formula will be applied:

S≥ L2 / 2000

**s* represents the area of the sign in square meters, and "L” the distance in meters from which the sign can be perceived.

REGULATIONS, TESTING, AND LEGISLATION

RD 2267: 2004

RD 393 2007

RD 485:1997

RD 486 1997

RD 681/2003

RD 2267/ 2004

RD UNE 1115/ 1985

RD ISO 7010: 2012

RD UNE 53127/ 2002

RD 314: 2006, RD 1371: 2007

RD 173: 2010 (CTE)

INSTALLATION

For all signage to be effective and fulfill its purpose, it must be placed in the right location so that:

- It attracts the attention of those who are the intended recipients of the information.

- It provides information with sufficient advance notice to be acted upon. - It is clear and has a unique interpretation.

- It informs about the course of action in each specific case.

- It offers a real possibility of compliance. The signage must remain as long as the situation that motivates it persists and be removed when the situation that motivated it disappears. The concurrence of signs or any other circumstance that hinders its perception or understanding must be taken into account so that it does not affect the effectiveness of the signage. When in a certain work area, there is a generalized need to signal different aspects of safety, the signs may be located together at the entrance to that area, grouping them by types of series, for example, prohibitions separated from danger warnings and obligations, as long as such groupings do not lead to misinterpretation or obscure the necessary information intended to be conveyed. This system does not replace the necessary signage of specific risk points that may exist within the work area. The means and devices of signage must be maintained and supervised so that they retain their intrinsic qualities and functionality at all times. When the sign requires a power source for its effectiveness, it must have an alternative emergency supply system in case of interruption of the main source. A maintenance and periodic review program must be established to control the correct state and application of the signage and ensure that it is regularly cleaned, repaired, and/or replaced, as well as supervised for its application, always considering any modification of working conditions. This program should be included in the general periodic review program of the workplaces. Before its implementation, all workers should be trained and informed so that they are aware of it. The training or information that must be provided for the correct application of the signage does not replace the employer's obligation to train and inform workers about the risks, as established in articles 18 and 19 of Law 31/1995, of November 8.

Signs can be installed using adhesives, neutral silicones, or mechanical means, depending on the surface where it needs to be installed. If adhesives are used, ensure that the area where it will be applied is free of dust, grease, and roughness, as these are the arch-enemies of any type of adhesive.

Other installation options, to increase the viewing angle of the sign, would be the installation of banners or panoramic views made of plastic or aluminum. If you would like more information about these supports, please request it from us.

STORAGE, CLEANING, AND CONSERVATION

The working temperature should not exceed 45º C. Higher temperatures may deform the supporting material.

The optimal storage temperature should be between 15º C and 25º C; with a humidity of 10/50%.

Cleaning methods; avoid using abrasive products. It is recommended to clean them with water and neutral detergents.

DIMENSIONS

Stainless steel

50 X 200 mm

APPLICATIONS

• Administration
• Companies
• Schools and universities

ABOUT SEKURECO

Experts in occupational safety! We are a young and recently established company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and occupational safety. Sekureco offers a range of over 10,000 specialized products in labor protection, available to companies and individuals, from the best brands and at the most competitive prices in the market.