Gray suede leather gloves Protection and safety COFAN

Suede leather gloves UNE-EN 20388. Suede leather gloves are suitable for multiple uses such as agriculture, gardening, construction, or DIY, among others. They provide protection and safety for the hands in processes and tasks where they may suffer damage. They are resistant and durable, ensuring a long product life. They are comfortable to wear and allow work to be done without discomfort.

DESCRIPTION

- Cow suede glove, American type

- With elastic adjustment on the back

- Gray color

- Bias-bound at the wrist

- PPE of CAT II

MATERIALS

Cow suede leather, thickness: 1 to 1.2 mm

TECHNICAL QUALITIES

The levels are obtained from the palm of the gloves. They range from lower performance (level 0) to higher performance (level 4 or 5). 0 indicates that the glove has a performance level weaker than the minimum for the given individual hazard. X: indicates that the glove has not been tested or that the testing method does not seem appropriate, considering the design of the gloves or the material.

- Abrasion (from 0 to 4): Suitability of the glove to resist wear

- Cut (from 0 to 5): Suitability of the glove to resist cutting by slicing

- Tear (from 0 to 4): Suitability of the glove to resist tearing*

- Puncture (from 0 to 4): Suitability of the glove to resist puncture

- Cut resistance EN 13997 (from 0 to 4): Suitability cut resistance

- Dexterity (from 0 to 5): Manual dexterity to perform a task (with training).

The higher the performance, the greater the glove's ability to withstand the associated risk. Performance levels are based on laboratory test results, which do not necessarily reflect real conditions in the workplace.

In accordance with the essential requirements of Regulation 2016/425 regarding ergonomics, safety, comfort, ventilation, and flexibility, and the standards EN420:2003 (dexterity 4), EN388:2016 (levels 3, 1, 2, 2, X).

Gloves against Mechanical risks (Levels obtained on the palm)

3 - Abrasion resistance (from 0 to 4)

1 - Cut resistance (from 0 to 5)

2 - Tear resistance (from 0 to 4)

2 - Puncture resistance (from 0 to 4)

X - Cut resistance X= no test (from A to F)

USAGE INSTRUCTIONS

Gloves for mechanical risks, for general use in dry environments, not suitable for chemical, microbiological, electrical, or thermal risks.

LIMITS OF USE

Do not use outside the defined application field in the usage instructions.

Attention users: gloves that have very high tensile strength (level 4) should not be used when there is a risk of being bitten by moving machinery. These gloves do not contain any substances known to be carcinogenic or toxic. Contact with the skin may cause allergic reactions in sensitive individuals (natural latex, in the elastic cuffs of certain gloves); in such cases, stop use and consult a doctor. Before using these gloves, check their integrity. Replace them if necessary.

STORAGE INSTRUCTIONS

Store in a cool, dry environment protected from frost and light in their original packaging.

CLEANING AND MAINTENANCE INSTRUCTIONS

No particular maintenance is recommended for this type of glove.

NORMATIVE

- EN388: Refers to protection against mechanical risks, such as cuts, abrasions, tears, and punctures. This standard indicates the level of protection that gloves offer in each of these areas.

APPLICATIONS

• Gardening
• Agriculture
• Livestock
• Material handling
• DIY
• Construction