Lanyard with energy absorber for scaffolding, 50mm hook

• Energy absorber with safety rope for work on 10,5 mm diameter ABM SCF scaffolding and eyelets at its ends.
• Approved for use in potentially explosive areas
• The material:

Manufacture from materials of any heading, except that of the product
For the purposes of this Regulation, the following definitions shall apply:

• Maximum elongation of the energy absorber: 0,7 m
• For the purposes of this Regulation, the following definitions shall apply:
• This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union

------------------------------------------------------------------------

In a large number of work environments workers are exposed to the high risk of falling from different heights, a hazard present both in work at height carried out at heights exceeding two metres in height such as those carried out in confined spaces or in wells, excavations, ditches... Workers should make use of Personal protective equipment (EPIs) appropriate to enable them to carry out their work as safely as possible, although other safety features are also needed, such as Mooring element with energy absorber for scaffolding, hook 50 mm.

The Mounting element with energy absorber for scaffolding, hook 50 mm is a component consisting of a safety-rope absorber for work on 10,5 mm diameter ABM SCF scaffolding with eyelets at its ends. It is approved for use in potentially explosive areas. The material of the safety rope is polyester and that of the energy absorber nylon. The maximum elongation of the energy absorber is 0,7 m. The hook of the element, as well as the musket, is made of galvanized steel, the first having an opening of 50 mm and the second of 18 mm.

The mooring elements they are very important components in the working environment, allowing the worker to be adequately protected against the possibility of falling from different heights, as they will thus have greater safety and grip. This reduces the chances of a fall that could have very negative consequences for the operator in the form of injury or even a missed outcome.

The mooring elements are not designed to function as a fall arrestor themselves unless so specified by the manufacturer and fitted with a compatible absorber. In this case the set cannot exceed two metres. In Sekureco you can find components like this Mounting element with energy absorber for scaffolding, hook 50 mm incorporating the system to restrain the worker safely in the event of falling from a height. These elements must always be checked and kept in perfect condition.