High strength Clean & Strip fiber disc 100 mm XT PRO purple XO-ZS X Coarse (10 pcs) 3M

High-strength Clean & Strip fiber disc 100 mm XT PRO purple XO-ZS X Coarse (10 units) 3M. The Scotch-Brite Clean and Strip XT Pro disc features a silicon carbide abrasive mineral embedded in an open nylon mesh. Our discs effectively remove rust, paint, scale, coatings, and adhesives from surfaces without significantly altering the base material.

Achieve greater adaptability without compromising strength when preparing metal surfaces or removing rust and paint with the Scotch-Brite™ Clean and Strip XT Pro disc. Our discs feature a combination of redesigned fiber, resin, and silicon carbide abrasive mineral that forms a thick, open mesh. Thanks to the spring-like behavior of the fibers, these discs can follow the contours of the workpiece more accurately, achieving a larger contact area with faster removal rates. They conform to the undulations of weld seams to polish the welds without removing them, and they also allow access to hard-to-reach areas without damaging the substrate. Silicon carbide cuts aggressively to leave a fine finish. Burrs, stains, and unwanted contaminants are effectively removed while maintaining the geometry of the workpiece; all of this reduces the need for rework and helps increase productivity. Additionally, the mesh holes allow debris to escape, preventing clogging of the abrasive. To ensure consistent cutting throughout the life of the abrasive, the resin bond of the disc gradually breaks down with use to reveal new fibers and a super-sharp silicon carbide abrasive. The high-strength fiber resists fragmentation and performs well on edges. These discs also offer low vibration and sparking, high speed, and a long lifespan.

The Scotch-Brite™ Clean and Strip XT Pro disc features a silicon carbide abrasive mineral embedded in an open nylon mesh. Our discs effectively remove rust, paint, scale, coatings, and adhesives from surfaces without significantly altering the base material.

Confirm in advance with Sekureco.eu approx. supply date.

CHARACTERISTICS

• Achieve greater adaptability without compromising durability when preparing metal surfaces or removing rust and paint with the Scotch-Brite Clean and Strip XT Pro disc.
• Our discs feature a combination of redesigned fiber, resin, and silicon carbide abrasive mineral that forms a thick and open mesh.
• Thanks to the behavior of the fibers simulating a spring, these discs are able to follow the contours of the workpiece with greater precision, achieving a larger contact area with faster removal rates.
• They conform to the contours of the weld beads to polish the welds without removing them, and they also allow you to access hard-to-reach areas without damaging the substrate.
• Silicon carbide cuts aggressively to leave a fine finish.
• Burrs, stains, and unwanted contaminants are effectively removed while maintaining the geometry of the workpiece; all of this reduces the need for rework and helps to increase productivity.
• In addition, the mesh holes allow the chips to escape, preventing the abrasive from clogging.
• To ensure a consistent cut throughout the lifespan of the abrasive, the resin bonding of the disc gradually breaks down with use to reveal new fibers and a super-sharpened silicon carbide abrasive.
• High-strength fiber resists fragmentation and performs well on edges. These discs also offer low vibration and spark, high speed, and a long lifespan.

SPECIFICATIONS

BENEFITS

• Quickly removes rust, paint, galvanization, and coatings from metal.
• High-strength fiber resists fragmentation and performs well at the edges.
• The high adaptability provides a larger contact surface for faster stripping.
• Silicon carbide mineral cuts aggressively and leaves a fine finish.
• Resist the encumbrance for a systematic cutting action.
• High-speed, low-vibration, and low-spark classification

APPLICATIONS

• Rust removal, paint removal, galvanization removal, coating removal, adhesive removal, and surface preparation.
• Ideal for low-pressure applications.

TECHNICAL DATA

RECOMMENDED SAFETY CONDITIONS

Store under the recommended conditions of (16-26°C / 35-50% rH) with a "first in - first out" rotation. Conditions of temperature and humidity outside these ranges should be avoided.