950U 5-hole sanding disc 125 mm (50 pcs) Cubitron II Hookit 3M

It consists of a cylinder with a diameter of not more than 50 mm and a diameter of not more than 50 mm 3M. What. The Disc 3M The Cubitron II Hookit 950U is an abrasive disc designed to offer high performance in bare body applications. It's driven by a grain 3M of fast and durable cutting precision in a super-open layer construction that resists sanding chip load.
The E-weight paper backing is specially designed for sanding metal.

3MTM CubitronTM II HookitTM Disc 950U is an abrasive disc designed to provide high performance in body-in-white (BIW) applications. It is powered by the precision-shape grain (PSG) of 3M which provides a fast cutting speed and a long product life thanks to a super open construction that resists sanding chips. The E-Paper holder is specially designed for sanding metal.

The new sandpaper discs 3MTM CubitronTM II HookitTM 950U are the ideal solution for removing paint, coatings and calamine from galvanized steel, aluminum, fiberglass and other abrasion-prone substrates. 950U discs feature an open-layer construction that reduces jamming and obstructions, without using stearates, to reduce the risk of contamination in finishes. These discs contain PSG grain 3M which takes the form of triangular tips which, unlike traditional abrasives, cut the metal neatly instead of leaving unwanted marks or grooves. These tips continuously sharpen themselves as they fracture, so they offer extremely fast cutting. 3M offers a full range of Hookit hook and loop discs for work spaces where discs with adhesive support may be contaminated with dust or dirt.

The finishes obtained with Hookit discs are usually thinner than those of discs with adhesive support, so they are often used in applications where a disc 3MTM StikitTM would be too aggressive. Hookit sanding discs are conveniently attached to a hook and loop disk tray (sold separately). They are easily removed and can be reused throughout the life of the abrasive. For excellent results, combine them with rotary sanders 3MThe Elite.

Confirm in advance with Sekureco.eu supply date approx.

SPECIFICATIONS

For the purposes of this Regulation, the following definitions shall apply:

CHARACTERISTICS

The precise grain form PSG of 3M cut faster and cleaner.

✓ Generates less heat

✓ Clean cut

✓ Much more durable

• Thanks to decades of experience in ceramic, abrasive and microreplication technology, 3M has literally reinvented the world of abrasive tools with the Cubitron II abrasives from 3M. What. The secret lies in patented precision ceramic grain technology.
• The triangular-shaped abrasive grain is sharpened during the grinding process and cuts the metal like a knife. It wears evenly and is extremely durable and stable under any grinding pressure.
• This means that the Cubitron II abrasive belts of 3M and abrasive grinders can operate at a lower temperature and can still be used when conventional abrasives have been rotted and glazed for a long time.
• The precision moulded grain contained in the Cubitron II abrasives of 3M combines the advanced properties of the original ceramic grain with the precise and micro replicated structure of the Trizact abrasives of 3M.
• Controlled wear of the grain in a triangular shape continuously creates new, sharp tips and edges. Conventional ceramic abrasive grain has an irregular shape.
• Instead of cutting neatly and evenly, it "pierces" the metal, generating excessive heat in the workpiece and the abrasive, which slows down the work, shortens the life of the tool and causes undesirable side effects, such as glazing of the abrasive.

BENEFITS

Without impairment of liability due to dust or dirt. Possible multiple loosening and application on support plates. Easily change grains and products. Cost savings for low power. Increased grinding performance and long service life. Universally applicable to different workpieces

APPLICATIONS

It can be used for the following workpieces:. Frames, doors, windows and various parts of the interior. Manufacture of furniture. Plastic parts. Use in all metals (stainless steel, steel, aluminium, etc.)

ABOUT 3M

3M it has solutions so diverse that they have the right answer for every need. And if not, they work alongside the customer to develop that new way of doing things. This different way of thinking is shown in studies developed to find the most optimal product for each organization.