SAFETOP 3 m cable retractable anti-fall block

Drop block of galvanized steel wire, with a total length of 3 m for vertical use.

CHARACTERISTICS

• Galvanized steel cable retractor, with a total length of 3 m for vertical use.
• Molded housing made of high impact-resistant polymer, to prevent breakage and is virtually indestructible.
• With galvanized steel wire with a diameter of 4 mm and fitted with a rotary hook (AZ002AS aperture 24 mm).
• Avoid undue twisting of the cable during use or in the event of a fall.
• It complies with EN 360.
• Maximum user weight: 140 kg.
• Cable material: galvanized steel
• Maximum length of cable: 3 m
• Weight: approximately 1.75 kg
• Static resistance: not less than 12 kN
• Braking force: less than 6 kN

TECHNICAL DATA

Unit of packaging

1 you

APPLICATIONS

Valid for vertical work. It is used in general construction work, hydrocarbon production, maintenance, telecommunications and confined spaces where worker mobility and fall protection are necessary.

Work carried out at heights, or in ditches, wells or confined spaces, in the vast majority of cases involves a high risk of falling to different heights. For this reason, they must have Personal protective equipment and an anti-fall system, the latter may be found to be composed of different elements, including the retractable fall guards, as in the case of In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:.

INDIVIDUAL PROTECTION SYSTEM

An individual fall protection system at different heights is composed of different elements, such as the body restraint (harness), which is fixed to a secure anchorage point by means of a connection system which may consist of one or more components, which vary according to the intended use. These components may be connected to each other separately or without being able to be separated.

In the case of the device retractable fall guard it is an anti-roll element with an automatic locking function and an automatic tensioning and retracting mechanism of the anchorage. This same element can integrate a other, of circular cross-section in the retractable mooring element.

The installation of this type of device must be carried out by qualified personnel, always following the instructions of the manufacturer, who will specify in the documentation how the device must be used to ensure safety.

It is very important to take extreme safety measures in all jobs, but even more so in those such as those carried out at heights or with other types of risks that can be very serious for workers in the form of injury or even, in the most serious cases, cause the death of the professional.

MATERIALS

• Toughened plastic housing
• Galvanized steel wire
• Manufacture from materials of any heading

STANDARDS AND REGULATIONS

EN360 (Retractable anti-rolling devices)

For the purposes of this Regulation, the following definitions shall apply:

PACKAGING

1 ud

ABOUT SAFETOP

It is an innovative company specialising in personal protective equipment with international commercial activity. Their approach is to distinguish themselves and offer an added value that leaves its mark on the products and services they offer, innovating and developing solutions to the new challenges posed by achieving a working environment with a level of protection, comfort and personal safety that meets today's social requirements.