Harness for work at height and suspension IRUDEK Expert Pro 300U

Multipurpose harness for work at height and suspension with 1 dorsal anchor point + 1 sternal anchor point + padded and breathable positioning belt with 2 lateral "D" rings and tool holder rings + 1 ventral "D" ring for seating.

New design, incorporating an automatic front carabiner for easy adjustment, straps designed in a U-shape for greater comfort on shoulders and adjustment on the dorsal strap. Adjustable on shoulders and thighs, padded leg straps. Automatic quick-release buckles.

With forged aluminum rings. Supplied in a nylon bag.

The new Expert Pro 300U model offers the possibility of installing a Krow ventral blocker on the additional strap provided by the harness, using a Delta link. Ideal for rope access work.

Size: S-M #100403400021
Size: L-XXL #100403400022

FEATURES

• Dorsal anchor for fall protection
• Lateral "D" anchors for positioning
• Sternal anchor for fall protection
• Ventral anchor for rope access, seating
• Automatic front carabiner
• Adjustable on shoulders and thighs
• Padded on shoulders and thighs
• K-Easy automatic buckles for easy adjustment

TECHNICAL DATA

• Weight: 2.5 Kg
• Harness strength: 15 > kN
• Rings strength: 22 kN
• Connector closure: Automatic Twist-Lock
• Strap width: 44 mm
• Capacity: 140 Kg
• Size: S-M. L-XXL

PACKAGING DATA

• Weight: 1950 gr
• Units/box: 5
• Packaging length: 43 cm
• Packaging width: 30 cm
• Packaging height: 15 cm

MATERIALS

• Rings: Forged aluminum
• Buckles: Steel
• Strap: Polyester
• Thread: High tenacity polyamide
• Front connector aluminum

SIZE GUIDE

*Measurements expressed in centimeters

*Approximate measurements

STANDARDS/REGULATIONS

Meets the requirements of the Personal Protective Equipment (PPE) Regulation/Directive

- EN 813

- EN 358

APPLICATIONS

Ideal for rope access work

For work at height: can be used with fall protection equipment

Securing and positioning

USAGE LIMITATIONS

The equipment must be assigned individually to a person.

- It is recommended that the anchor point where the fall protection system will be fixed is above the user. The anchor point must have a minimum static strength of 12 kN (metal) or 18 kN (textile) and must comply with the requirements of Standard EN 795:1996 / EN 795:2012.

- Personal protective equipment should not be used by individuals whose health status may affect the safety of the user under normal use conditions or in case of emergency.

- Personal protective equipment should only be used by a trained and competent person in its safe use.

WARNING

- A fall arrest harness is the only acceptable body restraint device that can be used in a fall protection system.

- The fall protection system must only be connected to the connection points of the harness that carry an identification with the uppercase letter “A”. The identification “A/2” indicates that it is necessary to connect two connection points with the same identification at the same time. It is prohibited to connect the protection system to a single connection point identified with “A/2”.

- In harnesses with an integrated belt, the connection to equipment for positioning work must only be made to the lateral anchor rings of the belt.

- The connection to the anchor point and to other equipment must be made through carabiners in accordance with EN362:2004.

- For use with fall protection EN 353-1:2014+A1:2017, EN 353-2:2002 it is recommended to connect the equipment to the front anchor point of the harness. For use with energy absorbers EN 355 or with fall protection EN 360 it is recommended to connect the equipment to the dorsal anchor point of the harness. - Before each use of the personal protective equipment, it must be carefully checked to ensure that it is in usable condition and works correctly.

- During the pre-use check, it is necessary to carefully inspect all elements of the equipment to verify that they do not show signs of deterioration, excessive wear, corrosion, abrasions, UV radiation degradation, cuts, and incorrect use. Pay special attention to the straps, seams, anchor rings, buckles, and adjustment elements.

ABOUT IRUDEK

Irudek Group is an expanding group of companies based in Spain, with operations in Italy, Brazil, and India, and sells its products in over 50 countries. Irudek Group represents safety and guarantee, backed by years of experience and by clients who have placed their trust in its products.