Safety harness for working at height 3M DBI-SALA EXOFIT NEX

Suspension harness at height 3M DBI-SALA EXOFIT NEX. ExoFit NEX body harness, front and rear fall arrest points, and work positioning strap. Adjustable at shoulders, waist, and legs. LQC buckles on legs and shoulder.

Specifically designed for workers who work suspended at height and use descent control devices and rope access equipment. It features water-repellent and abrasion-resistant straps that stay dry and strong. Safety housings with easy-open for hooks. Chest and back fall arrest points made of lightweight aluminum.

Delivery: 5 to 10 working days

DBI-SALA® ExoFit NEX

FEATURES

• Welded sling keepers

  Easy-open safety hooks to prevent tripping hazards.
• Covered labels and i-Safe

  A Velcro® cover protects the harness labels and incorporates the DBI-SALA i-Safe identification label. It provides an effective way to record and store inspection information.
• Duo-Lok quick-connect buckles

  Lightweight for one-handed use, and mesh closures maintain adjustments, this system can be closed instantly without risk of shifting.
• Tech-Lite aluminum front suspension point

  Versatile attachment point at the center of gravity for comfort and ease of movement while working in suspension.
• Repel technology strap

  Water-repellent to reduce mold and dust attraction, making it up to 5 times more abrasion-resistant.
• Hybrid comfort pads and ultra-soft edges

  Thanks to its lightweight, moisture-draining properties, and breathable padding, the user will feel comfortable at all times.
• Tech-Lite aluminum rear fall arrest point

  Higher level of safety and comfort thanks to an incredibly lightweight alloy commonly used for military and aerospace purposes.

TECHNICAL DATA

Enhanced straps: Abrasion-resistant and water-repellent to reduce mold and dirt buildup.

Sling hook housings: Prevents having to carry the sling in hand when not in use.

Comfort pads: On the underside of the shoulder, hip, and leg straps. TM® Harness 3M DBI-SALA

Quick-connect buckles: Lightweight aluminum alloy buckles for quick and easy connections. (Models with pass-through buckles are also available).

Vertical D-ring on the back: The vertical D-ring on the back ensures quick, easy, and secure connections to your fall arrest system.

Rigid belt: Allows carrying 27 kg of tools without breaking. Protected labels: Harness labels protected with hook-and-loop closure.

USAGE INSTRUCTIONS - ADJUSTING THE FALL ARREST HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, objects in your pockets can get caught between the harness straps and the user's body causing injury. Always refer to the usage instructions provided with the specific harness regarding proper installation and adjustment.

Step 1. Start. Hold the harness by the D-ring on the back, which is often attached through a D-pad, and ensure that the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it on your shoulders. Ensure that no strap is tangled and that they hang freely.

Step 3. Leg straps. Place it between your legs and secure the leg strap on your left side. Pull the strap between your legs and connect it to the left side buckle. Connect the right leg strap using the same procedure.

Step 4. Chest straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if equipped). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6. Adjust the harness to fit snugly. Tighten the shoulder straps until they are snug with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length, and the chest strap should be centered on the lower chest, about 15 cm below the shoulder. The chest D-ring on the vest-type harness moves up or down by adjusting the shoulder and leg straps. Center the back D-ring between the shoulder blades. Note: In applicable models, the back D-ring can be raised or lowered on the harness strap as needed for a proper fit. Readjust the leg straps to be snug. They should extend at least 8 cm beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

You're all set! A properly fitted and adjusted full-body harness will effectively distribute impact forces across the body and provide the proper support during suspension and rescue after a fall.

REGULATIONS

EN 358: 2001 - Personal protective equipment for work positioning and prevention of falls from height.

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses.

EN 813: 2008 - Fall arrest harnesses for restraint systems.

EN 1497: 2008 - Personal protective equipment against falls. Rescue harnesses.

RECOMMENDATIONS FOR THE COMPLETE PPE

Do not use this safety equipment unless you have received training from a competent person (this training may be repeated as often as necessary). Contact CAPITAL SAFETY for information on classes or if you have questions about using this equipment. Training should be conducted without exposing the user to a fall hazard and should be repeated periodically. (See the complete guide in the usage instructions).