Harness for climbing and positioning for wind energy gray with belt 3M DBI-SALA ExoFit NEX

Climbing and positioning harness for wind energy in gray with 3M DBI-SALA ExoFit NEX. The safety harness for wind energy is comfortable, durable, and includes a practical positioning belt for work.

For climbing towers, stay comfortable and protected by using the padded hip positioning belt. The work positioning belt allows you to have both hands free when used with positioning slings. It features safety attachments with easy-open hooks. The Revolver adjuster provides quick and easy vertical adjustment on the torso.

Confirm approximate delivery date in advance with Sekureco.eu.

FEATURES

• This safety harness includes a practical and comfortable work positioning belt that repels water to keep you dry and prevent mold and dirt accumulation.
• These abrasion-resistant straps have durable strength and respond to the most demanding daily conditions.
• Impact indicators make it easy to check for damage to the harness and help ensure its safe use.
• For added comfort, the harness has an integrated radio pouch, replaceable lumbar pads, and a protective hip pad that prevents wear when climbing up and down the tower.
• The sling hook attachments are easy-open to avoid tripping hazards.
• Thanks to their lightweight design, the Dual-lock quick-connect buckles can be used with one hand, and the strap adjusters maintain settings to ensure quick and slip-free connections.
• Covered identification labels help protect important information throughout the harness's lifespan.

SPECIFICATIONS

• For climbing towers, stay comfortable and protected by using the padded hip positioning belt.
• Work positioning belt that allows you to have both hands free when used with positioning slings.
• Safety attachments with easy-open hooks.
• The Revolver adjuster provides quick and easy vertical adjustment on the torso.
• Dual-lock quick-connect buckles that allow for quick, easy, and secure connections.
• Vertical D-ring on the back.
• Front and side D-rings made of lightweight aluminum.
• Water-repellent and abrasion-resistant straps that stay dry and strong.
• Integrated anti-trauma suspension straps.
• Integrated radio pouch.
• Impact indicators make it easy to check for damage to the harness and help ensure its safe use.
• Covered identification labels.

APPLICATIONS

Suitable for working safely in the wind energy sector.

TECHNICAL DATA

Enhanced straps: Abrasion-resistant and water-repellent to reduce mold and dirt buildup.

Sling hook attachments: Avoid having to carry the sling in hand when not in use.

Comfort pads: On the underside of the shoulder, hip, and leg straps. TM® Harness 3M DBI-SALA

Quick-connect buckles: Lightweight aluminum buckles for quick and easy connections. (There are also models with pass-through buckles).

Vertical D-ring on the back: The vertical D-ring on the back ensures quick, easy, and secure connections to your fall arrest system. Rigid belt: Allows carrying 27 kg of tools without breaking. Protected labels: Harness labels protected with hook and loop closure.

USAGE INSTRUCTIONS - ADJUSTING THE FALL ARREST HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, objects in your pockets can get caught between the harness straps and the user's body, causing injury. Always refer to the user instructions provided with the specific harness regarding proper installation and adjustment.

Step 1. Start. Hold the harness by the D-ring on the back, which is often attached through a D-pad, and ensure that the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it on your shoulders. Ensure that no strap is tangled and that they hang freely.

Step 3. Leg straps. Place it between your legs and secure the leg strap on your left side. Bring the strap up between your legs and connect it to the left-side buckle. Connect the right leg strap using the same procedure.

Step 4. Chest straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if applicable). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6. Adjust the harness to fit snugly. Tighten the shoulder straps until they are snug with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length, and the chest strap should be centered on the lower chest, about 15 cm below the shoulder. The chest D-ring of the vest-type harness moves up or down by adjusting the shoulder and leg straps. Center the back D-ring between the shoulder blades. Note: In applicable models, the back D-ring can be raised or lowered on the harness strap as needed for a proper fit. Readjust the leg straps to ensure they are snug. There should be at least 8 cm of strap beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

You're all set! A properly fitted and adjusted full-body harness will effectively distribute impact forces throughout the body and provide the proper support during suspension and rescue after a fall.

REGULATIONS

EN 358: 2001 - Personal protective equipment for work positioning and prevention of falls from height.

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses.

EN 1497: 2008 - Personal protective equipment against falls. Rescue harnesses.

EN 365: 2005 - Personal protective equipment against falls from height. General requirements for user instructions, maintenance, periodic inspection, repair, marking, and packaging.