Harness with belt and central D-ring, small 3M DBI-SALA Delta

Harness with belt and central D-ring, small 3M DBI-SALA Delta. The harness with belt and central D-ring 3M DBI-SALA Delta is one of our most popular harnesses; it is ergonomically adjustable and includes lightweight buckles and high-strength straps.

It features a triangular anti-tangle pattern, allowing for easy placement of the harness. This model includes a comfortable and practical work positioning belt with a central D-ring.

• Comfortable and practical work positioning belt with a central D-ring
• Water-repellent and abrasion-resistant straps that stay dry and strong
• The anti-tangle design helps to adjust the harness perfectly
• The Revolver adjuster provides quick and easy vertical adjustment on the torso

Confirm approximate supply date with Sekureco.eu.

FEATURES

• The straps of this safety harness repel water to keep it dry, preventing mold and dirt accumulation.
• These abrasion-resistant straps have durable strength and respond to the most demanding daily conditions.
• The Revolver vertical adjusters provide simple and quick adjustments on the torso straps, eliminating loose ends and preventing misalignment.
• Its anti-tangle design helps to adjust the harness perfectly and allows for daily use with great comfort.
• Impact indicators facilitate checking for damage on the harness and help ensure safe usage.
• The harness also includes a work positioning belt that allows it to be used with positioning slings to keep hands free.
• Covered identification tags help protect important information during the harness's lifespan.

BENEFITS

• Comfortable and practical work positioning belt with a central D-ring.
• Water-repellent and abrasion-resistant straps that stay dry and strong.
• The anti-tangle design helps to adjust the harness perfectly.
• The Revolver adjuster provides quick and easy vertical adjustment on the torso.
• Vertical D-ring on the back.
• Impact indicators facilitate checking for damage on the harness and help ensure safe usage.
• Covered identification tags.

APPLICATIONS

Work safely at height with the harness with belt and central D-ring 3M DBI-SALA Delta. Recommended for utilities.

TECHNICAL DATA

Improved straps: Abrasion-resistant and water-repellent to reduce mold and dirt buildup.

Sling hook accommodations: Prevents having to carry the sling in hand when not in use.

Comfort pads: On the underside of the shoulder, hip, and leg straps. TM® Harness 3M DBI-SALA

Quick connection buckles: Lightweight aluminum alloy buckles for quick and easy connections. (There are also models with pass-through buckles).

Vertical D-ring on the back: The vertical D-ring on the back ensures quick, easy, and secure connections to your fall arrest system. Rigid belt: Allows carrying 27 kg of tools without breaking. Protected labels: Harness labels protected with hook and loop closure.

USAGE INSTRUCTIONS - ADJUSTING THE FALL ARREST HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, objects in your pockets can become trapped between the harness straps and the user's body, causing injury. Always refer to the usage instructions provided with the specific harness regarding proper installation and adjustment.

Step 1. Start. Hold the harness by the dorsal D-ring, which is often attached through a D-pad, and ensure that the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it on your shoulders. Ensure that no strap is tangled and that they hang freely.

Step 3. Leg straps. Place it between your legs and secure the left leg strap. Raise the strap between your legs and connect it to the left buckle. Connect the right leg strap using the same procedure.

Step 4. Chest straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if equipped). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6. Adjust the harness to fit snugly. Tighten the shoulder straps until they are snug with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length, and the chest strap should be centered on the lower chest, about 15 cm below the shoulder. The chest D-ring of the vest-type harness moves up or down by adjusting the shoulder and leg straps. Center the dorsal D-ring between the shoulder blades. Note: In applicable models, the dorsal D-ring can be raised or lowered on the harness strap as needed to achieve a proper fit. Readjust the leg straps to ensure they are snug. There should be at least 8 cm of strap beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

You are all set! A properly fitted and adjusted full-body harness will effectively distribute impact forces throughout the body and provide proper support during suspension and rescue after a fall.

REGULATIONS

EN 358: 2001 - Personal protective equipment for work positioning and prevention of falls from height.

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses.

EN 365: 2005 - Personal protective equipment against falls from height. General requirements for instructions for use, maintenance, periodic inspection, repair, marking, and packaging.

RECOMMENDATIONS FOR THE SET OF PPE

Do not use this safety equipment unless you have received training from a competent person (this training may be repeated as often as necessary). Contact CAPITAL SAFETY for information on classes or if you have questions about using this equipment. Training should be conducted without exposing the user to a fall hazard and should be repeated periodically. (See the complete guide in the usage instructions).