Small rescue harness for mining DBI-SALA Delta 3M

Small rescue harness for mining DBI-SALA Delta 3M. It is one of our most popular harnesses; it fits ergonomically and includes lightweight buckles and high-strength straps. It features a triangular anti-tangle pattern, allowing for easy harness placement.

D-rings on the shoulders for vertical rescue and recovery in confined spaces.

Confirm approximate supply date with Sekureco.eu beforehand.

FEATURES

• The straps of this safety harness repel water to keep it dry, preventing the accumulation of mold and dirt.
• These abrasion-resistant straps have lasting strength and withstand the most demanding daily conditions.
• The Revolver vertical adjusters provide a simple and quick adjustment of the torso straps, eliminating loose ends and preventing misalignment.
• The shoulder attachment points can be used for vertical recovery in confined spaces.
• Its anti-tangle design helps to fit the harness perfectly and allows for daily use with great comfort.
• Impact indicators facilitate checking for damage to the harness and help ensure its safe use.
• Covered identification labels help protect important information throughout the harness's lifespan.

BENEFITS

• The anti-tangle design helps to fit the harness perfectly and facilitates its placement.
• D-rings on the shoulders for vertical rescue and recovery in confined spaces.
• Water-repellent and abrasion-resistant straps that remain dry and strong.
• The Revolver adjuster provides quick and easy vertical adjustment on the torso.
• Covered identification labels.
• Impact indicators facilitate checking for damage to the harness and help ensure its safe use.
• Vertical D-ring on the back.

APPLICATIONS

Helps to work at height safely.

TECHNICAL DATA

Enhanced straps: Abrasion-resistant and water-repellent to reduce mold and dirt buildup.

Hook sling accommodations: Prevents having to carry the sling in hand when not in use.

Comfort pads: On the underside of the shoulder, hip, and leg straps. TM® Harness 3M DBI-SALA

Quick-connect buckles: Lightweight aluminum alloy buckles for quick and easy connections. (There are also models with pass-through buckles).

Vertical D-ring on the back: The vertical D-ring on the back ensures quick, easy, and secure connections to your fall arrest system. Rigid belt: Allows carrying 27 kg of tools without breaking. Protected labels: Harness labels protected with hook and loop closure.

USAGE INSTRUCTIONS - ADJUSTING THE FALL ARREST HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, objects in your pockets can get caught between the harness straps and the user's body causing injuries. Always refer to the usage instructions provided with the specific harness regarding proper installation and adjustment.

Step 1. Start. Hold the harness by the D-ring on the back, which is often attached through a D-pad, and ensure that the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it on your shoulders. Ensure that no strap is tangled and that they hang freely.

Step 3. Leg straps. Place it between your legs and secure the left leg strap. Bring the strap up between your legs and connect it to the left-side buckle. Connect the right leg strap using the same procedure.

Step 4. Chest straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if equipped). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6. Adjust the harness to fit snugly. Tighten the shoulder straps until they are snug with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length, and the chest strap should be centered on the lower chest, about 15 cm below the shoulder. The chest D-ring of the vest-type harness moves up or down by adjusting the shoulder and leg straps. Center the back D-ring between the shoulder blades. Note: In applicable models, the back D-ring can be raised or lowered on the harness strap as needed for a proper fit. Readjust the leg straps to ensure they are snug. There should be at least 8 cm of strap beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

You are ready! A properly placed and adjusted full-body harness will effectively distribute impact forces throughout the body and provide the proper support during suspension and rescue after a fall.

REGULATIONS

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses

EN 1497: 2008 - Personal protective equipment against falls. Rescue harnesses

EN 365: 2005 - Personal protective equipment against falls from height. General requirements for instructions for use, maintenance, periodic inspection, repair, marking, and packaging.

RECOMMENDATIONS FOR THE COMPLETE PPE SET

Do not use this safety equipment unless you have received training from a competent person (this training may be repeated as often as necessary). Contact CAPITAL SAFETY for information on classes or if you have questions about using this equipment. Training should be conducted without exposing the user to a fall hazard and should be repeated periodically. (See the complete guide in the usage instructions).