Harness front and rear attachment point universal size 3M PROTECTA First

Front and rear fixation point harness universal size 3M PROTECTA First.. The 3M PROTECTA First safety harness is a solution for working at height safely and comfortably in a wide variety of circumstances.

This harness offers cost-effectiveness, high quality, and reliability for working at height. Large back plate for easy and efficient placement. The shoulder and leg straps contrast to facilitate quick placement. Covered identification labels.

Confirm in advance with Sekureco.eu approximate supply date.

FEATURES

• Cost-effectiveness, high quality, and reliability for working at height.
• Large back plate for easy and efficient placement.
• The shoulder and leg straps contrast to facilitate quick placement.
• Covered identification labels.
• Size: Small and Universal.

BENEFITS

• Our safety harness features a large back plate, making it easier to put on and take off.
• The shoulder and leg straps contrast to facilitate quick placement of the harness, and the covered identification labels protect important information during the harness's lifespan.
• The 3M PROTECTA First fall protection products are designed under a simple concept: they provide a fundamental range of fall protection with exceptional value.
• In addition to being cost-effective, First equipment is of high quality and very reliable for staying safe.

RECOMMENDED APPLICATIONS

If you need safe and cost-effective fall protection for a wide variety of circumstances, use the 3M PROTECTA First harness.

Helps to work at height safely.

TECHNICAL DATA

Enhanced straps: Abrasion-resistant and water-repellent to reduce mold and dirt buildup.

Hook sling accommodations: Avoid having to carry the sling in hand when not in use.

Comfort pads: On the underside of the shoulder, hip, and leg straps. TM® Harness 3M DBI-SALA

Quick connection buckles: Lightweight aluminum alloy buckles for quick and easy connections. (There are also models with pass-through buckles).

Vertical D-ring on the back: The vertical D-ring on the back ensures quick, easy, and secure connections to your fall arrest system. Rigid belt: Allows carrying 27 kg of tools without breaking. Protected labels: Harness labels protected with hook and loop closure.

USAGE INSTRUCTIONS - ADJUSTING THE FALL ARREST HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, objects in your pockets may get caught between the harness straps and the user's body causing injury. Always refer to the usage instructions provided with the specific harness regarding proper installation and adjustment.

Step 1. Start. Hold the harness by the D-ring on the back, which is often attached through a D-pad, and ensure that the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it on your shoulders. Ensure that no strap is tangled and that they hang freely.

Step 3. Leg straps. Place it between your legs and secure the leg strap on your left side. Raise the strap between your legs and connect it to the left side buckle. Connect the right leg strap using the same procedure.

Step 4. Chest straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if applicable). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6. Adjust the harness to fit snugly. Adjust the shoulder straps until they are tight with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length, and the chest strap should be centered at the bottom of the chest, about 15 cm below the shoulder. The D-ring on the chest of the vest-style harness moves up or down by adjusting the shoulder and leg straps. Center the D-ring on the back between the shoulder blades. Note: In applicable models, the D-ring on the back can be raised or lowered on the harness strap as needed to achieve a proper fit. Readjust the leg straps to fit snugly. There should be at least 8 cm of strap beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

You're all set! A properly placed and adjusted full-body harness will effectively distribute impact forces across the body and provide the proper support during suspension and rescue after a fall.

REGULATIONS

EN 358: 2001 - Personal protective equipment for positioning at work and prevention of falls from height.

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses.

EN 1497: 2008 - Personal protective equipment against falls. Rescue harnesses.

EN 365: 2005 - Personal protective equipment against falls from height. General requirements for instructions for use, maintenance, periodic inspection, repair, marking, and packaging.