Protective mask 9320 Aura FFP2 NR D without valve (1 mask) 3M


The mask 3M Aura FFP2 NR D without valve 9320+ self-filter for particulate matter (1 mask).

Sculpted nasal panel that fits the nose and face contour, helping to improve compatibility with eye protection 3M. What. Innovative chin tongue designed to facilitate placement and adjustment, helping to achieve a comfortable fit.

Exhaust valve offering improved comfort for humid and hot environments and/or demanding work rhythms.

Read moreShow less
€2.95 (TAX incl.)
€2.44 (no TAX)


from 3,99€ + VAT. Free from €150 +VAT


Free up to 14 days after purchase, excluding personalized and made-to-order products



+34 876 43 01 24
[email protected]

You may also like
€3.10 (TAX incl.)
€2.56 (no TAX)
The mask 3M 8822 FFP2 NR D 8822 with exhaust valve 3M.  FFP2 class facial filtering that protects against medium levels of fine dust and oil or water based fogs, which are commonly produced in tasks such as polishing...

The brand's 9320 mask 3M it is a type FFP2 respiratory protection mask that complies with European regulations EN 149:2001+A1:2009. This mask is designed to protect the wearer from non-volatile solid and liquid particles in the air, and has a minimum filtration efficiency of 94%.

The 9320+ mask is made with a high-quality filter material that consists of three layers. The outer layer is moisture resistant and protects the mask from dirt and damage. The middle layer is a high-efficiency filter material that traps airborne particles. The inner layer is soft and comfortable against the skin, allowing for prolonged use without causing irritation.

This mask is suitable for use in a wide variety of work and professional environments, such as the food industry, construction, mining, agriculture and cleaning, among others. It can also be used by healthcare personnel, for example, in hospitals and healthcare centers.

It is important to note that the 9320+ mask should not be used in environments containing toxic gases or vapors, nor for protection against viruses. In the latter case, the use of a mask with higher filtration efficiency, such as an FFP3 mask, is recommended.

In summary, the brand's 9320 mask 3M is an FFP2 mask designed to protect the user from non-volatile solid and liquid particles in the air. It is made from high quality materials and is suitable for a wide variety of work and professional environments. It is important to follow the manufacturer's instructions and use the mask according to the recommendations for use to ensure its effectiveness.

Protective mask + Aura FFP2 NR D without valve (1 mask) 3M. The mask provides comfort and style without compromising performance. Thanks to the innovative low breathing resistance filtering technology of 3M, you will be able to breathe through the mask with less effort.

Protects against dust and mist present in a wide variety of industrial applications or other work situations where FFP2 protection is required.

Conformed nose panel, which increases the field of vision and compatibility with glasses


Self-filtering masks for 3M™ Aura™ 9300 offer effective respiratory protection for use in industries where protection against non-volatile solid and liquid particles is needed.

  • Product tested and approved in accordance with the EN 149:2001 A1:2009 standard (EN 149:2001 Ai:2009 classification, maximum use level 12 x VLA).
  • Foldable and easy to store, with a patented 3-panel design that adapts to facial movements to ensure user comfort.
  • Filter material of 3M™ that provides effective filtration with low breathing resistance for consistent high-quality performance.
  • Sculpted nose panel conforms to the nose and contours of the face, helping to improve compatibility with eye protection 3M.
  • Innovative chin tab designed for easy placement and adaptation, helping to achieve a comfortable fit.
  • Exhalation valve that offers improved comfort for humid and hot environments and/or with demanding work rates.
  • Soft foam in the nose bridge area, comfortable on the skin.
  • Individual and hygienic packaging that protects the mask from contamination before use.
  • Even the pressure of the adjustment bands improves comfort on the neck, face and head, increasing the feeling of security.
  • Color-coded adjustment bands for easy identification: yellow for FFP1, blue for FFP2 and red for FFP3.


Quantity per pack
Protection level
Smaller unit for sale
Exhalation valve


  • FFP2 NR D disposable mask that protects against solid and/or non-volatile liquid particles (EN 149:2001+Ai:2009 classification)
  • High performance filter material 3M, which facilitates breathing, reducing resistance and increasing user comfort
  • Innovative 3-panel design: adapts to faces of different shapes and sizes allowing greater facial movement during conversation. This makes it much more comfortable to carry and easy to store when not in use
  • With individual packaging: hygienic packaging that protects the mask from any contamination before use. Easily carried and stored before use
  • Embossed top panel Reduces the flow of hot, humid air exhaled through the top panel, helping to reduce the formation of fog on eye protectors
  • Headband Holds the respirator firmly in place, helping to create a proper and comfortable seal, with blue color coding to indicate performance level: FFP2 according to EN 149:2001 A1:2009
  • Individual packaging Hygienic packaging helps protect the mask from breathing before use, allows for convenient storage and distribution in the workplace
  • Compatible with: Eye protection 3M, hearing protection 3M


The components of the masks are made with the following materials:

  • Adjustment bands: Polyisoprene
  • Staples: Steel
  • Nose pad: Polyurethane
  • Nose clip: Aluminum
  • Filter: Polypropylene
  • Valve*: Polypropylene
  • Valve diaphragm*: Polyisoprene

These products do not contain components made from natural rubber latex.

Maximum weight of products:

  • If valve (9310 and 9320) = 10g
  • With valve (9312+, 9322+ & 9332+) = 15g

* Only models 9312, 9322 and 9332


These products meet the requirements of the European standard EN 149:2001 A1:2009, self-filtering masks for particles.

These masks offer protection against solid and non-volatile liquid particles.

These products are classified according to their filtration efficiency and their inward leakage value (FFP1, FFP2 and FFP3), also according to their use time and resistance to saturation. The tests included in this standard include filter penetration, tests after storage, flammability, breathing resistance and internal leakage. Reusable masks must also reflect care instructions and mandatory storage and saturation performance tests (saturation testing is optional for disposable masks). You can purchase a copy of the EN 149:2001 +A1:2009 standard through AENOR.


  • R = Reusable
  • NR = Non-reusable (only one work shift)
  • D = Complies with the saturation test


These products meet the requirements of European Directive 89/686/CEE, Personal Protective Equipment Directive (in Spain, R.D. 1407/1992) and therefore, they have CE marking

Certification under Article 10, EC Type Examination and Article 11, EC Quality Control, has been issued by BSI Product Services, Maylands Avenue, Hemel Hempstead, HP2 4SQ, Great Britain (Notified Body number 0086).


These masks are suitable for use at maximum non-volatile solid and liquid particle concentrations of:

Reference      Classification EN 149+A1     Exhalation valve       VLA

9320                 FFP2 NR D                         Without valve                 12

Respiratory protection is only effective if selected, donned, and used correctly and when worn for the entire duration of exposure to contaminants.


Particle masks 3MTM AuraTM 9300+ have a shelf life of 5 years. The expiry date is stated on the carton. Before you start using them, check that the product is within its shelf life. The product should be stored in a clean, dry place in a temperature range of – 20°C to + 25°C at a relative humidity < 80%. Use the original packaging to store and transport the product.


Contaminated products should be disposed of in accordance with local hazardous waste laws.


Before putting on the mask, make sure your hands are clean.

It is important to note that the mask should be replaced when it becomes wet or dirty, or after continuous use of 8 hours. In addition, it is recommended not to use the mask for more than one day and not to share it with other people.

1. With the back of the mask facing up and using the tab on the bottom panel, unfold the mask separating the top and bottom edges, opening them to a cup shape. Slightly bend the center of the nose clip.

2. Make sure both edges are fully extended

3. Hold the mask in one hand with the open edges facing your face. Grasp both adjustment bands with your other hand. Place the mask under your chin, with the nose clip facing up, and pull the adjustment straps over your head.

4. Place the upper adjustment band on the crown of your head and the lower adjustment band on your neck, below your ears. The bands should not be twisted. Adjust the top and bottom edge for comfort, making sure they are not folded

5. Using both hands, mold the nose clip around your nose (bottom) to ensure a good fit and seal. Shaping the clip with one hand may result in a less effective fit.

6. Check the fit before entering the contaminated area.


1. Cover the front of the mask with both hands, taking care not to distort the fit of the mask.

2. (a) Masks WITHOUT VALVE - EXHALE forcefully;

(b) Masks WITH VALVE - INHALE forcefully.

3. If leakage is noticed around the nose, readjust the nose clip to eliminate the leak. Repeat the fit check.

4. If you notice leaks around the edges, replace the adjustment bands on both sides of the head to eliminate the leak. Repeat the fit check.

If YOU CANNOT get a proper fit, DO NOT enter the contaminated area. Contact your supervisor.

“Fit-Test” tests are mandatory in some countries.

For more information regarding “Fit-Test” fit tests, please contact 3M.



3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.

Read moreShow less
Product Details


Customers who bought this product also bought:

Product Review

Average rating

☆☆☆☆☆ ★★★★★
3 Reviews
☆☆☆☆☆ ★★★★★ Excellent 3
☆☆☆☆☆ ★★★★ Good 0
☆☆☆☆☆ ★★★ Medium 0
☆☆☆☆☆ ★★ Poor 0
☆☆☆☆☆ Terrible 0

  • Reviews (3)


☆☆☆☆☆ ★★★★★ (@COMMENT_GRADE@)



Write a comment