FFP3 particulate mask without valve 9330+ Gen3 (20 masks) Aura 3M

The respirator for manual sanding 3M Aura 9330+ is our filtering face respirator with a 3-panel design, adjustable nose clip, sculpted nose panel, and headbands with color coding for comfortable wear. With an FFP3 rating, it is available in packs of 20.

Confirm in advance with Sekureco.eu approx. supply date.

CHARACTERISTICS

• With our Aura 3-panel design, it is designed to allow for greater facial movement while speaking, and the high-performance filter material is designed to facilitate breathing.
• Greater facial mobility with the Aura 3-panel design.
• Improved breathability through high-performance filter material that allows for easy breathing.
• The headbands keep the mask in place and have a color code to indicate the level of performance - red: FFP3 according to EN 149:2001+A1:2014.
• Complies with European standards: CE mark 0086 (EN 149:2001 + A1:2009 FFP3 NR D)
• This product helps protect against certain particles at concentrations of up to 10 times the occupational exposure limit.

BENEFITS

• The adjustable nasal clip, the low-profile curved design, and the sculpted nasal panel help ensure a better seal and a precise fit, as well as a good field of vision and better compatibility with glasses. 3M.
• The raised top panel is designed to further minimize glasses fogging and achieve greater clarity.
• The adjustable nasal clip allows for better sealing with a precise fit.
• Without natural latex components.
• Compatible with eye and hearing protection of 3M

SPECIFICATIONS

COMPONENTS AND MATERIALS

The following materials are used in the production of 3MTM AuraTM Series 9300+Gen3 particle masks:

ADJUSTMENT INSTRUCTIONS

Adjustment instructions Refer to the figure

1. Before adjusting the device, make sure to have clean hands. Before each use, all components of the mask should be inspected to ensure they are not damaged. 1. With the back facing up and using the tabs, separate the upper and lower panels.

2. Pull the tabs of the chin and nose panels until the nasal clip bends in such a way that the mask takes on the shape of a cup. Make sure that both panels are fully unfolded.

3. Without releasing the tabs, hold the mask with the open side facing your face and place it over your face.

4a. Mask WITH VALVE: with one hand, hold the sides of the valve to keep the mask in position on the face. 4b. Mask WITHOUT VALVE: hold the mask with one hand with the open side facing the face.

5. With the other hand, take each of the strips and adjust them on your head.

6. Place the upper strap on the crown of your head and the lower strap at the nape of your neck and below your ears. The straps should not be twisted. Adjust the upper and lower panels using the tabs until you feel comfortable. Make sure the panels are unfolded and that the tabs are folded.

7. Shape the nasal clip with both hands to fit the shape of the nose to ensure a precise fit and proper sealing. If you press the nasal clip with one hand only, the effectiveness of the mask may be reduced.

8. Before entering the workplace, you must ensure that the mask is properly sealed to your face.

APPLICATIONS

Protects against low concentrations of dust and common mists in a wide variety of industrial applications and other situations where FFP3 protection is required.

STANDARDS/ REGULATIONS

Products are classified by their filtering efficiency and their maximum total performance against inward leakage (FFP1, FFP2, and FFP3), as well as by their utility and resistance to clogging.

Among the performance tests of this standard are the penetration test through the filter; practical behavior test; flammability test; breathing resistance test; and total inward leakage test.

Reusable products are also subjected to cleaning and storage tests, as well as mandatory obstruction resistance tests (the latter are optional for non-reusable products). You can purchase a complete copy of the standard EN 149:2001+A1:2009 through your country's standardization body.

APPROVALS

These products carry the CE mark as they comply with the requirements of Community Directive 89/686/EEC or European Regulation (EU) 2016/425. To determine the applicable legislation, the Certificate and the Declaration of Conformity should be reviewed on the website. http://www.3M.com/Respiratory/certs These products are approved and are subject to annual audits by BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United Kingdom, notified body no. 0086. Manufactured in the United Kingdom, in a facility that has ISO 9001:2008, ISO 14001:2004, and OHSAS 18001:2007 certifications.

VIDEOS