€130.76 (no TAX)
Safety harness for positioning with "D" anchor rings Irudek Wind Blue 2
Harness with 1 dorsal anchorage point.
- Weight: 2,200 gr
- Units/box: 5
- Packaging width: 45 cm
- Packaging depth: 34 cm
- Packaging height: 14 cm
€289.14 (no TAX)
Harness with 1 dorsal anchor point + 1 sternal anchor point + positioning belt with 2 lateral “D” anchor rings for positioning. Adjustable straps on shoulders, thighs, and chest. The buckles on the leg straps and the belt are automatic and provide easy adjustment. 2 tool rings. It features a specially padded woven polyester mesh that offers better energy absorption and provides maximum comfort to the user. Forged aluminum rings. Supplied with a nylon bag.
Sizes S-M #100409900004
Sizes L-XXL #100409900003
FEATURES
- Dorsal and frontal fall protection rings in blue for quicker detection
- Irupad positioning belt with breathable Holetech padding, with two lateral rings
- Adjustable straps on shoulders, back, and legs
- Automatic quick-release buckles on leg straps, belt, and chest
TECHNICAL DATA
- Weight: 2.2 Kg
- Harness strength: 15 > kN
- Strap width: 44 mm
- Capacity: 140 Kg
- Belt: Irupad
- Size: S-M. L-XXL
- Service life: 10 years of use + 1 year of storage
PACKAGING DATA
- Weight: 2,200 gr
- Units/box: 5
- Packaging length: 45 cm
- Packaging width: 34 cm
- Packaging height: 14 cm
MATERIALS
- Strap: polyester
- Sewn thread: polyamide
- Adjustment buckles: steel
- Automatic buckles: steel
- Rings: aluminum
SIZE GUIDE
|
S-M |
L-XL |
|
|
A |
55-60 |
55-70 |
|
B |
90-130 |
100-155 |
|
C |
45-80 |
45-100 |
%2000-05-44.png)
*Measurements are expressed in centimeters
*Approximate measurements
STANDARDS/REGULATIONS
Meets the requirements of the Regulation/Directive on Personal Protective Equipment (PPE)
- EN 361
- EN 358
APPLICATIONS
Ideal for rope access work
For work at height: can be used with fall protection equipment
Securing and positioning
USAGE LIMITATIONS
The equipment must be assigned individually to a person.
- It is recommended that the anchor point where the fall protection system will be fixed is above the user. The anchor point must have a minimum static strength of 12 kN (metal) or 18 kN (textile) and must comply with the requirements of Standard EN 795:1996 / EN 795:2012.
- Personal protective equipment should not be used by individuals whose health status may affect the safety of the user under normal use conditions or in case of emergency.
- Personal protective equipment should only be used by a trained and competent person in its safe use.
WARNING
- A fall arrest harness is the only acceptable body restraint device that can be used in a fall protection system.
- The fall protection system must be connected only to the connection points of the harness that carry an identification with the uppercase letter “A”. The identification “A/2” indicates that it is necessary to connect two connection points with the same identification at the same time. It is prohibited to connect the protection system to a single connection point identified with “A/2”.
- In harnesses with an integrated belt, the connection to the positioning work equipment must be made only to the lateral anchor rings of the belt.
- The connection to the anchor point and to other equipment must be made through carabiners in accordance with EN362:2004.
- For use with fall protection EN 353-1:2014+A1:2017, EN 353-2:2002, it is recommended to connect the equipment to the frontal anchor point of the harness. For use with energy absorbers EN 355 or with fall protection EN 360, it is recommended to connect the equipment to the dorsal anchor point of the harness. - Before each use of the personal protective equipment, it must be carefully checked to ensure that it is in usable condition and functions correctly.
- During the pre-use check, it is necessary to carefully inspect all elements of the equipment to verify that they do not show signs of deterioration, excessive wear, corrosion, abrasions, UV radiation degradation, cuts, and incorrect use. Pay special attention to the straps, seams, anchor rings, buckles, and adjustment elements.
ABOUT IRUDEK
Irudek Group is an expanding group of companies based in Spain, with operations in Italy, Brazil, and India, and sells its products in over 50 countries. Irudek Group is safety and guarantee, backed by years of experience and by clients who have placed their trust in its products.
SOBRE IRUDEK
Irudek Group es un grupo de empresas en expansión con central en España, implantaciones en Italia, Brasil e India y vende sus productos en más de 50 países. Irudek Group es seguridad y garantía, avalada por años de experiencia y por clientes que han depositado su confianza en sus productos.
Technical documentation
- Ficha técnica Arnés de seguridad para posicionamiento con anillas de anclaje "D" Irudek WIND 2 Download
- Declaración de Conformidad Arnés de seguridad para posicionamiento con anillas de anclaje "D" Irudek WIND 2 Download
- Manual de Usuario Arnés de seguridad para posicionamiento con anillas de anclaje "D" Irudek WIND 2 Download
- Guía de tallas Arnés de seguridad para posicionamiento con anillas de anclaje "D" Irudek WIND 2 Download
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@