Certified tape as a tying and climbing element SAFETOP

Certified model as a lanyard and climbing element. Material: polyester.

FEATURES

• Category III PPE
• Material: polyester
• Width: 20 mm
• Static strength: 22 kN
• Length: 15 cm
• The total length of the lanyard including an energy absorber must not exceed 2 meters
• The breaking strength of the fibers is at least 0.6N/Tex
• Rope available in 30 cm (Ref 80321) and in 60 cm (Ref 80322)

MATERIALS

Polyester rope

APPLICATIONS

Suitable for use with an energy absorber as a safety lanyard (EN354) or as climbing and mountaineering equipment (EN566).

STANDARDS/REGULATIONS

• EN354 (Lanyard elements)
• EN566 (Climbing and mountaineering equipment)

LIFETIME

Inspections: the equipment must be inspected every 12 months by an authorized person or by the manufacturer. Inspections must be recorded in the inspection sheet attached to the PPE along with the instruction manual.

The maximum lifespan is 5 years from the date of first use, unless the equipment is defective or has already been used to arrest a fall, in which case it must be discarded immediately.

Cleaning: clean with water and soap not exceeding 30ºC. Do not dry with heat.