Retractable fall protection block with a cable of 6-10-15m - EN360 (ref. CR200)

• Molded casing made of high-impact polymer to prevent breakage and is practically indestructible.

• With galvanized steel cable of 4mm diameter and equipped with a swivel hook (AZ002AS opening 24mm). Prevents improper twisting of the tape during use or in the event of a fall.

• Complies with standard EN 360.

• Maximum user weight: 140kg.
• Working length 6 (5.10 kg) - 10 (5.30 kg) - 15 (6.10 kg) m.

---------------------------------------------------

Work at height requires professionals and companies to adopt appropriate prevention and safety measures so that workers can carry out their activities properly protected against a possible fall from different heights, the great risk faced by all those professionals who carry out some type of activity in buildings, vertical work, work in confined spaces or in wells, excavations, trenches... These professionals must use the appropriate Personal Protective Equipment (PPE) as well as all the elements that make up the fall protection system that are necessary for the protection of workers. In this sense, one of the elements that make up this system is the retractable fall arresters such as the Retractable cable fall arrest block 6-10-15m - EN360 (ref. CR200).

The Retractable cable fall arrest block 6-10-15m - EN360 (ref. CR200) has a molded casing made of high-impact polymer and features a galvanized steel cable with a diameter of 4 mm that is equipped with a swivel hook. It complies with the EN 360 standard and supports a maximum user weight of 140 kg.

The retractable fall arrester is a device that allows the worker, once connected to the fall protection system, to perform their activities freely with the assurance that the system will stop them in the event of a fall from different heights.

This device is an automatic recovery mechanism that, when combined with a retention, braking, or cushioning system, can be used both indoors and outdoors.

These types of devices must be attached to a fixed or mobile anchor that is safe to perform these delicate tasks, using a large-opening connector that allows them to be directly connected to a structure.

Given the great importance of all these elements in terms of safety, it is essential that both before installation and before use, there is a check to ensure that the device is in perfect condition, and it must undergo periodic checks established by the manufacturer, replacing it with a new device in case it shows any type of deficiency or deterioration that may impair its effectiveness, posing a corresponding danger to the worker.