Safety harness with small blue body belt DBI-SALA ExoFit 3M

Safety harness with small blue body belt DBI-SALA ExoFit 3M. The safety harness with body belt 3M DBI-SALA ExoFit is designed with a single X-shaped piece that wraps around the shoulders and back for easy donning without tangling, providing safety and comfort. This model includes a comfortable and practical positioning belt for work.

Includes a comfortable and practical positioning belt for work to keep hands free when used with positioning slings. The breathable padding helps work safely. A single X-shaped piece that wraps around the shoulders and back. Easy to put on without tangling.

Confirm in advance with Sekureco.eu approximate delivery date.

FEATURES

• The safety harness has breathable padding and soft edges.
• The padding on shoulders, hips, and leg straps is integrated to reduce slipping, and the back padding is made of tear-resistant ballistic nylon.
• An easy-to-use tongue and buckle system and front torso adjusters with springs help provide a good fit.
• The harness also includes a positioning belt for work that allows it to be used with positioning slings to keep hands free.
• Covered identification tags help protect important information during the harness's lifespan.

BENEFITS

• Includes a comfortable and practical positioning belt for work to keep hands free when used with positioning slings.
• The breathable padding helps work safely.
• A single X-shaped piece that wraps around the shoulders and back. Easy to put on without tangling.
• Front torso adjuster with spring for quick and easy adjustment.
• Quick-connect buckles that allow for fast, easy, and secure connections.
• Padded straps for the legs and hips.
• Tear-resistant ballistic nylon back padding.
• Covered identification tags.

APPLICATIONS

Work at height comfortably and protected with the harness with body belt 3M DBI-SALA ExoFit. For construction, mining, oil, and gas.

TECHNICAL DATA

Enhanced straps: Abrasion-resistant and water-repellent to reduce mold and dirt buildup.

Hook sling accommodations: Prevents having to carry the sling in hand when not in use.

Comfort pads: On the underside of the shoulder, hip, and leg straps. TM® Harness 3M DBI-SALA

Quick-connect buckles: Lightweight buckles made of aluminum alloy for quick and easy connections. (There are also models with pass-through buckles).

Vertical D-ring on the back: The vertical D-ring on the back ensures quick, easy, and secure connections to your fall arrest system. Rigid belt: Allows carrying 27 kg of tools without breaking. Protected labels: Harness labels protected with hook and loop closure.

USAGE INSTRUCTIONS - ADJUSTING THE FALL ARREST HARNESS

Before starting. Empty your pockets, as during work or, more importantly, in the event of a fall, objects in your pockets can become trapped between the harness straps and the user's body causing injuries. Always refer to the usage instructions provided with the specific harness regarding proper installation and adjustment.

Step 1. Start. Hold the harness by the D-ring on the back, which is often attached through a D-pad, and ensure that the straps are not twisted.

Step 2. Shoulder straps. Slide the harness over your arms and place it on your shoulders. Ensure that no strap is tangled and that they hang freely.

Step 3. Leg straps. Place it between your legs and secure the leg strap on your left side. Raise the strap between your legs and connect it to the left-side buckle. Connect the right leg strap using the same procedure.

Step 4. Chest straps. Attach the chest strap buckle to the corresponding opposite side buckle.

Step 5. Waist strap (if equipped). Attach the waist strap buckle to the corresponding opposite side buckle.

Step 6. Adjust the harness to fit snugly. Adjust the shoulder straps until they are tight with the adjusters. The left and right sides of the shoulder straps should be adjusted to the same length, and the chest strap should be centered at the bottom of the chest, about 15 cm below the shoulder. The chest D-ring of the vest-type harness moves up or down by adjusting the shoulder and leg straps. Center the back D-ring between the shoulder blades. Note: In applicable models, the back D-ring can be raised or lowered on the harness strap as needed to achieve a proper fit. Readjust the leg straps to ensure they are tight. There should be at least 8 cm of strap beyond the buckle on the leg straps. Adjust the waist strap (if equipped).

You're all set! A properly placed and adjusted full-body harness will effectively distribute impact forces across the body and provide the proper support during suspension and rescue after a fall.

REGULATIONS

EN 358: 2001 - Personal protective equipment for work positioning and prevention of falls from height.

EN 361: 2003 - Personal protective equipment against falls from height. Fall arrest harnesses.

EN 1497: 2008 - Personal protective equipment against falls. Rescue harnesses.

EN 365: 2005 - Personal protective equipment against falls from height. General requirements for instructions for use, maintenance, periodic inspection, repair, marking, and packaging.

RECOMMENDATIONS FOR THE SET OF PPE

Do not use this safety equipment unless you have received training from a competent person (this training may be repeated as often as necessary). Contact CAPITAL SAFETY for information about classes or if you have questions about using this equipment. Training should be conducted without exposing the user to a fall hazard and should be repeated periodically. (See the complete guide in the usage instructions).